System Setup; Setup Instructions For Windows 98Se - TRENDnet TFM-PCIV92I User Manual

V.92 pci modem

Hide thumbs Also See for TFM-PCIV92I:

Table of Contents

Section 2.3

System Setup

Section 2.3.1

STEP 1.

After you complete the modem hardware installation and turn on your PC, Windows system will

automatically detect your new added devices. Windows system will then prompt you with an Add

New Hardware Wizard screen as shown in figure.

Then click on Next.

STEP 2.

A prompt screen will ask you to select Search for the best driver for your device or display a list

of all the drivers in a specific location, so you can select the driver you want.

Please select the recommended one as shown in figure.

Then click on Next.

STEP 3.

And then, a prompt screen will ask you to indicate where your driver is located, floppy disk drives,

CD-ROM drive, Microsoft Windows Update or specify a location: .

Insert the Modem Driver CD-ROM disk attached with your modem into the CD-ROM drive device.

Then select Specify a location as shown in figure.

Click on Next.

Rev.1.00.2.1.57.75

I206 V.92 PCI MODEM USER'S MANUAL

- 4 -

Table of Contents

I206