Memory: 32MB or above Hard Drive Space: 4MB or above Windows 2003 server/XP/2000/ME/98(SE) Application Workstation with 56K High Speed Internal PCI Data/Fax/Voice Modem Package Content TFM-PCIV92 Driver CD-ROM Quick Installation Guide 1 x RJ-11 Cable (TFM-PCIV92) Phone Jack Telephone or...
2. How to Install Important! DO NOT install the TFM-PCIV92 in the computer until instructed to do so. Windows 2000/XP 1. After inserting the Driver CD-ROM, the installation menu appears. Click Install Modem driver. 2. Click Windows 2000 & XP.
Page 5
5. After the progress window disappears, close the installation menu. Click X. Note: You must leave the Driver CD-ROM in your computer's CD-ROM Drive before following the instructions below. Please refer to your computer's user manual regarding hardware installation. 6. Turn OFF computer and peripherals, and then disconnect all cables.
Page 6
10. Turn ON your computer and wait until the Windows desktop appears. The Installation for TFM-PCIV92 is Now complete. For detailed information regarding the TFM-PCIV92 configuration and advanced settings, please refer to the User's Guide CD-ROM or TRENDnet's website at www.trendnet.com. English...
3. Verify Installation Windows 2000/XP 1. Right-click My Computer and click Properties. Under the Hardware tab, click Device Manager. 2. Expand the “Modems” heading to verify that the Agere Systems PCI Soft Modem has been installed and that no question marks or exclamation points are visible.
Does the modem connect to the computer's sound card via an internal cable? The TFM-PCIV92 does not require an internal audio/microphone cable. After successful installation of the TFM-PCIV92, I tried to connect to the Internet but I do not get a dial tone. What should I do? A3.1:...