Graco 239031 Instructions-Parts List

INSTRUCTIONS-PARTS LIST
This manual contains important
warnings and information.
READ AND KEEP FOR REFERENCE.
INSTRUCTIONS
Parts
TexSpray EXT HP
Auxiliary Tank Kit 239031
100 psi (7 bar) Maximum Air and Fluid Working Pressure
WARNING
Pressure Relief Procedure
To reduce the risk of serious bodily injury, including
electric shock and splashing fluid in the eyes,
follow this procedure whenever you stop spraying.
1. Shut off the pump or sprayer.
2. Trigger the gun.
3. Open the gun air valve.
4. Disconnect the power source.
Grounding
To reduce the risk of electric shock, proper electri-
cal grounding is essential. See your separate pump
or sprayer instruction manual, and consult your
local electrical codes for detailed grounding instruc-
tions.
Working Pressure
To reduce the risk of component rupture and
serious bodily injury, never exceed 100 psi (7 bar)
FLUID WORKING PRESSURE. Do not exceed the
maximum working pressure of any other compo-
nent in the system.
Fluid and Solvent Compatibility
Do not use 1,1,1-trichloroethane, methylene chlo-
ride, other halogenated hydrocarbon solvents or
fluids containing such solvents in this equipment,
which contains aluminum and/or zinc parts. Such
use could result in a serious chemical reaction, with
the possibility of explosion, which could cause
death, serious bodily injury and/or substantial
property damage.
GRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN 55440–1441
http://www.graco.com
ECOPYRIGHT 1997, GRACO INC.
Graco Inc. is registered to I.S. EN ISO 9001
ti5016a
308814
Rev. B