Sleep Timer Function; Adjusting The Volume Of The Speakers - Denon AVR-3311CI Owner's Manual

Sleep timer function

The power automatically goes into standby once the set time has
elapsed.
This is convenient for playing sources while going to sleep.
SLEEP
Press and display the time you
want to set.
The indicator on the display lights.
• The time switches as shown below each
SLEEP
time is pressed.
OFF 10 min 20 30
120 110 100 90 80
To cancel the sleep timer
SLEEP
Press to set "OFF".
The indicator on the display turns off.
• The sleep timer setting is canceled if this unit's power is set to
standby or turned off.
• When power to the main zone is turned off with the sleep timer,
power in ZONE2 and ZONE3 are also turned off.

Adjusting the volume of the speakers

You can adjust the channel level either according to the playback
sources or to suit your taste, as described below.
n Adjusting the volume of the different speakers
1
ZONE SELECT
Press
zone mode to "MAIN".
The "MAIN" indicator lights.
2
Press AMP
control unit to amplifier operation
40 50 mode.
70 60 3
Press CH LEVEL
CHANNEL LEVEL
Front L
Front R
Center
Subwoofer
Surround L
Surround R
S.Back L
S.Back R
Fader
Select
4
Use ui to select the speaker.
The speaker that can be set switches each time one of the
buttons is pressed.
5
Use o p to adjust the volume.
• In the case of a subwoofer, pressing o when it is at "–12 dB" will
change the setting to "OFF".
When a headphone jack is inserted, the headphone channel level can
be adjusted.
to switch the
to set the remote
.
0.0dB
0.0dB
0.0dB
0.0dB
0.0dB
0.0dB
0.0dB
0.0dB
Front Rear
n Adjusting the volume of groups of speakers
(Fader function)
This function lets you adjust (fade) the sound all at once from the
front (front speaker / front height speaker / front wide speaker /
center speaker) or rear (surround speaker / surround back speaker).
1
ZONE SELECT
Press to switch the
zone mode to "MAIN".
The "MAIN" indicator lights.
2
AMP
Press to set the remote
control unit to amplifier operation
mode.
3
Press CH LEVEL .
CHANNEL LEVEL
Front L 0.0dB
Front R 0.0dB
Center 0.0dB
Subwoofer 0.0dB
Surround L 0.0dB
Surround R 0.0dB
S.Back L 0.0dB
S.Back R 0.0dB
Fader Front Rear
Select
4
Press i to select "Fader", then select the item to be
adjusting using o p.
5
Use o p to adjust the volume of the speakers.
(o : front, p: rear)
• The fader function does not affect the subwoofer.
• The fader can be adjusted until the volume of the speaker is adjusted
to the lowest value of –12 dB.
ENGLISH
Convenient functions
55