Saving Frequently Used Settings (Quick Select Function); Playing The Same Network Audio On Different Devices Connected In A Network (Party Mode Function) - Denon AVR-3310CI Owner's Manual

Saving Frequently Used Settings
(Quick Select Function)
All of the settings in step 1 can be memorized together. By memorizing
frequently used settings, you can quickly access and enjoy a playback
environment that is consistently the same.
Saving the Settings
1
Set the items below to the settings you want to save.
q Input Source (vpage 27)
w Volume Level (vpage 67)
e Surround Mode (vpage 69)
r Audyssey Setting (MultEQ ® , Dynamic EQ™, Dynamic
Volume™) (vpage 73, 74)
t Video Select (vpage 48)
2
QUICK SELECT
Press and hold the desired
"Memory" appears on the display.
The current settings will be memorized.
GQuick Select DefaultsH
Input Source
DVD
Quick Select 1
Quick Select 2 SAT/CBL
Quick Select 3 VCR
Calling the Settings Out
QUICK SELECT
Press at which the settings you want to
call out are saved.
The " ", " " or " " indicator lights on the display.
Naming Quick Select settings
n
See "Quick Select Name" (vpage 42).
NOTE
Input sources stored with the quick select function cannot be selected
if they have been deleted at "Source Delete" (vpage 42). In this
case, store them again.
Playing the Same Network Audio
on Different Devices Connected in a
Network (Party Mode Function)
The same network audio (Internet Radio, Media Server or iPod
DIRECT) can be played on multiple DENON products equipped with
the Party Mode function and connected in a network.
The party mode consists of one organizer and up to four attendees.
When one unit starts the party mode as the organizer, up to four
devices on which the party mode function is activated automatically
participate in the party as attendees. "Party Mode Function" (vpage
39) must be set to "ON" ahead of time in order to use the party mode
function.
Starting the Party Mode as the Organizer
1
[PARTY]
Press to become the organizer.
until
"Enter Party Mode?" is displayed.
An error message is displayed when you are not connected to a
b
network.
2
Press to select "Yes", then press
o p
Volume
The " " indicator on the display lights. The input source
–40dB
automatically switches to "NET/USB" and the attendees are
–40dB
automatically selected.
–40dB
3
Play the desired track.
To Cancel the Party Mode
n
1
While in the party mode, press
"Exit Party Mode?" is displayed on the GUI screen.
2
Press to select "Yes", then press
o p
"Power off Attendees component?" is displayed.
3
Press to select "Yes" or "No", then press
o p
ENTER .
Yes : The power of the attendees is turned off and the party
mode is canceled.
No : The party mode is canceled without turning off the
power of the attendees.
Participating in the Party Mode as an Attendee
• When the organizer starts the party mode, up to four attendees are
selected automatically. No operation is required.
• When a device becomes an attendee, "
display. The input source automatically switches to "NET/USB" and
the same network audio as on the organizer is played.
• If there are fewer than four attendees, a device can join the party
mode after it has started. To participate in the party mode, perform
the operation described below.
1
[PARTY]
Press
"Enter Party Mode?" is displayed.
b An error message is displayed when you are not connected to a
network.
2
Press
o p
To Cancel the Party Mode
n
1
While in the party mode, press
ENTER .
"Exit Party Mode?" is displayed on the GUI screen.
2
Press
o p
In this case, the other devices remain in the party mode.
"Rhapsody", "Napster" and "USB" are not available in the Party
Mode.
There can only be one organizer in the network. To form a new party
mode, first cancel the current party mode.
[PARTY]
.
ENTER .
Convenient Functions
" appears on the
.
to select "Yes", then press ENTER .
[PARTY]
.
to select "Yes", then press ENTER .
0