Connecting The Monitor - Denon AVR-3310CI Owner's Manual

Connecting Devices
NOTE
• If the GUI menu "Audio Out" setting (vpage 36) is set to "AMP", the sound may be interrupted when
the monitor's power is turned off.
• The audio signal from the HDMI output terminal (sampling frequency, number of channels, etc.) may be
limited by the HDMI audio specifications of the connected device regarding permissible inputs.
n Connecting to a Device Equipped with a DVI-D Terminal
When an HDMI/DVI conversion cable (sold separately) is used, the HDMI video signals are converted
to DVI signals, allowing connection to a device equipped with a DVI-D terminal.
NOTE
• No sound is output when connected to a device equipped with a DVI-D terminal. Also make the audio
connections.
• Signals cannot be output to DVI-D devices that do not support HDCP.
• Depending on the combination of devices, the video signals may not be output.
Settings Related to HDMI Connections
Set as necessary. For details, see the respective reference pages.
Input Assign
n (vpage 45)
Set this to change the HDMI input terminal to which the input source is assigned.
HDMI Setup
n (vpage 36)
Make settings for HDMI video/audio output.
• RGB Range
• Audio Out
• Auto Lip Sync
• HDMI Control
NOTE
The audio signals output from the HDMI connectors are only the HDMI input signals.


Connecting the Monitor

• Select the terminal to use and connect the device.
• For video connections, see "Converting Input Video Signals for Output (Video Conversion Function)"
(vpage 10).
For instructions on HDMI connections, see "Connecting Devices Equipped with HDMI Terminals" on
page 14.
Monitor
To listen to TV audio through this device, use the optical digital or analog connection.