Parental Lock; Antenna Aiming - Denon AVR-3310CI Owner's Manual

Making the Input Settings (Input Setup)
Giving Names to Preset Stations (Preset Name)
Setting items
A1 ~ G8
This can be set when the input source is HD Radio .
Select the preset channel.
p
1. Press or
2. Use o p to set the cursor to the character you want to change.
3. Use ui to change the character, then press
• Up to 8 characters can be input.
• The input character type can be switched by pressing
the display name is being changed.
• The types of characters that can be input are as shown below.
GUpper case charactersH ABCDEFGHIJKLMNOPQRSTUVWXYZ
GLower case charactersH abcdefghijklmnopqrstuvwxyz
GSymbolsH ! " # $ % & ' ( ) * + , - . / : ; < = > ? @ [ \ ] ˆ _ ` { | } ˜
GNumbersH 0123456789
4. Repeat steps 2 and 3 to change the display name.
Default Yes : Reset to the defaults.
Reset all settings to factory No : Do not reset to the defaults.
default.
Check the SIRIUS Radio Reception Sensitivity

(Antenna Aiming)

• This can be set when the input source is SIRIUS .
• Install the antenna with radio reception sensitivity set to maximum.
Setting items
Satellite
Display
Indicate satellite signal
¡¡¡
strength.
¡¡
Terrestrial
¡
Indicate terrestrial signal
strength.

Main remote control
operation buttons
Setting contents
ENTER
.
ENTER
.
[SEARCH]
(Space)
Setting contents
Condition
Signal strength is excellent
Signal strength is good
Signal strength is weak
No signal
:Displaying the menu
Cancel the menu
Setting SIRIUS Radio Reception Restrictions

(Parental Lock)

• This can be set when the input source is SIRIUS .
• For any channel, set the radio reception limits.
Setting items
Lock Setting
while Set the channel radio
reception limits.
Edit Lock Code
Change the password.
:Moves the cursor
:Confirm the setting
(Up/Down/Left/Right)
Default settings are underlined.
Setting contents
1. Press ui to select "Lock Setting", and then press
uio p
2. Pressing , input the password (4 digits number) and press
ENTER
.
3. Select channel by pressing ui , and set the lock by pressing
Unlock : Do not lock selected channel(s).
Lock : Lock selected channel(s). When a Parental Locked channel is
tuned, "Enter Lock Code" is displayed, then input the password.
• The default password is "0000".
• If the password is wrong, "Lock Code is incorrect" is displayed. Input
the correct password.
• While listening to the channel being played, you can also set parental
lock (vpage 56).
1. Press ui to select "Edit Lock Code", and then press
2. Input current lock code (4 digits) using uio p
uio p
3. Input new lock code (4 digits) using
4. Input new lock code (4 digits) again using uio p
5. Press ui to select "Execute", and then press
If the correct password is input, "Completed" is displayed, and the new
password is modified.
• If the old password is incorrectly input, "Current Lock Code is incorrect"
is displayed, and proceed again from step 1.
• If the password input is 3 digits or less, "Enter 4 digits number" is
displayed, and input again with a 4 digit password.
• If the new password is not correctly input, "New Lock Codes do not
Match" is displayed and the password does not change.
:Return to previous menu
ENTER
p or .
o p .
ENTER
p or .
ENTER
, and press .
ENTER
, and press .
ENTER
, and press .
ENTER
.