Zone2 Setup - Denon AVR-2311CI Owner's Manual

Setting items
2ch Direct/Stereo Crossover : Set the maximum frequency of the bass signal output from
(Continued) each channel to the subwoofer.
• 40Hz / 60Hz / 80Hz / 90Hz / 100Hz / 110Hz / 120Hz / 150Hz / 200Hz /
250Hz
• This setting can be set made "2ch Direct/Stereo" – "Subwoofer" is set
to "Yes".
• If the "2ch Direct/Stereo" – "Front" setting is "Large" and the "SW
Mode" setting is "LFE", "Full Band" is displayed and the setting cannot
be made.
Dist. FL / Dist. FR : Select the speaker.
• 0.0ft – 60.0ft (12.0ft) / 0.00m – 18.00m (3.60m) : Set the distance to
the speaker.
Set so that the difference between the front left speaker and front
right speaker distances is 20.0 ft (6.0 m) or less.
Level FL / Level FR : Select the speaker.
• –12.0dB – +12.0dB (0.0dB) : Adjust the level of each channel.
ON : Memorize settings. Automatically play with the last used surround
Auto Surround Mode
Make setting for mode.
memorizing surround mode OFF : Do not memorize settings. Surround mode does not change
setting for each input signal according to input signal.
type.
• The auto surround mode function lets you store in the memory the
surround mode last used for playing the four types of input signals listed
below.
q Analog and PCM 2-channel signals
w Dolby Digital and DTS 2-channel signals
e Dolby Digital and DTS multi-channel signals
r LPCM Multi-channel signals
• When playing in PURE DIRECT, the surround mode does not change
even if the input signal is changed.
Remote control operation
buttons
Setting details
Move the cursor
(Up/Down/Left/Right)
Setting items
EQ Customize Audyssey Byp. L/R : Set when not using "Audyssey Byp. L/R" equalizer.
Set so that unused equalizer • Used : Use.
settings are not displayed • Not Used : Do not use.
MULTEQ
when is pressed.
Set so that "Audyssey Byp. L/R" settings can be made when
Audyssey Auto Setup is performed.
Audyssey Flat : Set when not using "Audyssey Flat" equalizer.
• Used : Use.
• Not Used : Do not use.
Set so that "Audyssey Flat" settings can be made when Audyssey
Auto Setup is performed.
Manual : Set when not using the "Manual" equalizer.
• Used : Use.
• Not Used : Do not use.
The equalizer mode in which
"Not Used" is selected
cannot be stored and
recalled in the Quick Select
function.

ZONE2 Setup

Set the audio to play back with ZONE2.
Setting items
Bass –10dB – +10dB (0dB)
Adjust low frequency range
(bass).
Treble –10dB – +10dB (0dB)
Adjust high frequency range
(treble).
HPF ON : The low range is attenuated.
Make settings for cutting OFF : The low range is not attenuated.
the low range to reduce
distortion in the bass.
Level Lch –12dB – +12dB (0dB)
Adjust the left channel
The "Level Lch" can be set when "Channel" (vpage 62) is set to
output level.
"Stereo".
Level Rch –12dB – +12dB (0dB)
Adjust the right channel
The "Level Rch" can be set when "Channel" (vpage 62) is set to
output level.
"Stereo".
Confirm the setting
ENGLISH
Manual Setup
Setting details
Default settings are underlined.
Setting details
61
Return to previous menu