Denon AVR-2311CI Owner's Manual page 66

Setting items
GUI
NOTE
(Continued)
When a format other than the video format of the connected TV is set, the
picture will not be displayed properly.
Text : Display the details of operation when switching surround mode,
input mode, etc.
• ON : Turn display on.
• OFF : Turn display off.
Master Volume : Display the master volume during adjustment.
• Bottom : Display at the bottom.
• Top : Display at the top.
• OFF : Turn display off.
When the master volume display is hard to see when superimposed
on movie subtitles, set to "Top".
USB : Set the USB screen display time when the input source is "USB/
iPod".
• Always : Show display continuously.
• 30sec : Show display for 30 seconds after operation.
• 10sec : Show display for 10 seconds after operation.
• OFF : Turn display off.
iPod : Set the iPod screen display time when the input source is "DOCK"
or "USB/iPod".
• Always : Show display continuously.
• 30sec : Show display for 30 seconds after operation.
• 10sec : Show display for 10 seconds after operation.
• OFF : Turn display off.
TUNER : Set the tuner screen display time when the input source is "HD
Radio".
• Always : Show display continuously.
• 30sec : Show display for 30 seconds after operation.
• 10sec : Show display for 10 seconds after operation.
• OFF : Turn display off.
Remote Preset Codes See "Registering preset codes" (vpage 65).
Search a preset code to
register in the remote
control unit.
Quick Select Name • Up to 16 characters can be input.
Change the "Quick Select" • For character input, see page 45.
display title to one you prefer.
Zone Rename • Up to 10 characters can be input.
Change the display title of • For character input, see page 45.
each zone to one you prefer.
Remote control operation
buttons
Setting details
Move the cursor
(Up/Down/Left/Right)
Setting items
Trigger Out Trigger Out
Select the condition for
n When setting for zone (MAIN ZONE / ZONE2)
activating Trigger Out for
Trigger out is activated through linkage to the power of the zone set
the input source, surround
to "ON".
mode, etc.
n When setting for input source
See "TRIGGER OUT jacks"
Activate trigger out when the input source set to "ON" is selected.
(vpage 20) for more
information on trigger out. Active for the zone set to "ON" with "When Setting for Zone".
n When setting for surround mode
Activate trigger out when the surround mode set to "ON" is selected.
Active when the "MAIN ZONE" set to "ON" with "When Setting
for Zone" is selected, and when the input source set to "ON" with
"When Setting for Input Source" is selected.
• ON : Activate trigger on this mode.
• – – – : Do not activate trigger on this mode.
Default : The "Trigger Out" settings are returned to the default settings.
• Yes : Reset to the defaults.
• No : Do not reset to the defaults.
Remote ID Setup 1 / 2 / 3 / 4
Used when receiving
NOTE
maintenance from a DENON
service engineer or custom
Only use this function if so instructed by a DENON serviceperson or installer.
installer.
Dimmer Bright : Normal display brightness.
Adjust the display Dim : Reduced display brightness.
brightness of this unit. Dark : Very low display brightness.
OFF : Turns the display off.
Buttons on the main unit can be used for
operations.
Each time
changed as shown below.
Bright
Setup Lock ON : Turn protection on.
Protect settings from OFF : Turn protection off.
inadvertent change.
When canceling the setting, set "Setup Lock" to "OFF".
NOTE
When "Setup Lock" is set to "ON", the settings listed below can no
longer be changed. Also, "SETUP LOCKED!" is displayed if you attempt
to operate related settings.
· Menu operations
· RESTORER
· Dynamic Volume ®
Confirm the setting
Manual Setup
Setting details
DIMMER
is pressed, the setting is
Dim
OFF Dark
· Channel Level
· MultEQ ®
· Dynamic EQ ®
Return to previous menu
ENGLISH
63