Drive Panel - Dell XPS 710 Owner's Manual

book.book Page 104 Friday, October 27, 2006 4:02 PM
1
9 Replace the computer cover (see "Replacing the Computer Cover" on page 127).
NOTICE:
To connect a network cable, first plug the cable into the network port or device and then plug it into the
computer.
10 Connect the computer and devices to electrical outlets, and turn them on.
See the documentation that came with the drive for instructions on installing any software required for
drive operation.

Drive Panel

CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the Product
Information Guide.
104
Removing and Installing Parts
2
1 power cable 2 data cable