Drive-Panel Inserts - Dell OptiPlex GX745 User'smanual

8. Attach the SATA connector removed in
9. Locate an unused SATA connector on the system board and attach a data cable to this connector and to the second hard drive.
1 data cable
2 hard-drive system board connector
3 power cable
10. Replace the computer cover (see
Drive-Panel Inserts
If you are installing a new floppy or optical drive instead of replacing a drive, remove the drive-panel inserts.
1. Follow the procedures in Before You
2. Remove the drive panel by sliding the drive release latch downward to open the panel. Then remove it from the hinges.
step 5 to the first hard drive.
Replacing the Computer Cover).
Begin.