Drive-Panel Inserts - Dell Optiflex 740 User Manual

8. Locate and connect a SATA cable to the SATA1 connector on the system board (see
1 hard-drive data 2 hard-drivedata cable on system
cable board
9. Replace the computer cover (see

Drive-Panel Inserts

If you are installing a new floppy drive, media card reader, or optical drive instead of replacing a drive, remove the drive-panel inserts.
1. Follow the procedures in Before You
2. Remove the drive panel by sliding the drive release latch in the direction indicated on the latch to open the panel. Then remove it from the hinges.
3 hard-drive power
cable
Replacing the Computer Cover).
Begin.
System Board Components for mini tower computers).