Datamax Mark II M-4206 Operator's Manual page 158

To save a manually entered setup (for example, an application that required an Advanced Entry Calibration before
beginning) as a configuration file using the front panel:
Step Displayed Message
1
!!
SFBEZ!
2 NFOV!NPEF!!
!
NFEJB!TFUUJOH
3 NFOV!NPEF!
TZTUFN!TFUUJOHT!
4 TZTUFN!TFUUJOHT!!
DPOGJHVSBUJPO!GJMF
5 DPOGJHVSBUJPO!GJMF!
SFTUPSF!BT!DVSSFOU
6
DPOGJHVSBUJPO!GJMF!
!
TBWF!TFUUJOH!BT
7 TBWF!TFUUJOH!BT!
!
}
8
TBWF!TFUUJOH!BT!!
!
TQFDJBM!}
9 TQFDJBM!TUPDL!
!
TVDDFTTGVM
148
Operator Action
Press the Key.
MENU
Use the Key to scroll to 'System
FWD
Settings'.
Press the Key to select 'System
Settings'.
Press the Key to select
!
'Configuration File'.
Press the Key to scroll to 'Save
FWD
!
Setting As'.
Press the Key.
Enter a file name using the
to scroll through the characters.
Note: To change an accepted character, select the delete function (solid flashing block) and press the ENTER Key.
Use the Key to accept the
character.
Note: To abort the "save setting" function, delete all entered characters in the file name and press the ESCAPE Key.
Press the Key repeatedly to save
the file name and return to 'Ready'.
You are entering 'Menu Mode'.
The
REV
You are entering the 'System Settings' menu.
You are entering the 'Configuration File' submenu.
The
REV
Press the
Key The
REV
FWD
Continue entering the file name in this manner
("SPECIAL STOCK" has been used as an example).
Save complete. (To restore a saved file using the
front panel see Section 5.1.5.)
Comment(s)
Key can also be used.
Key can also be used.
Key to exit this selection.
Key can also be used.
M-Class