Datamax Mark II M-4206 Operator's Manual page 102

If experiencing this problem...
Poor print quality:
Skips labels when printing:
Unable to print rotated text:
92
•
The printhead may need cleaning; see Section 6.1.
•
Adjust the Heat and Print Speed settings through the Front Panel or by host
commands; non-display printers see Section 4.5.2, display printers see Section
5.1.3.
•
The media/ribbon combination may not be compatible; contact a Media
Representative.
•
The Printhead Leveling Cam may be incorrectly adjusted; see Section 6.2.
•
The Platen Roller may be dirty or worn; clean or call for service.
•
The Printhead Burn Line may need adjusting; see Section 6.3.
•
Media Calibration may be needed; non-display printers see Section 4.7, display
printers see Section 5.4.
•
The Media Sensor may be out of position; readjust the position; see Section 3.3.
•
The format may be within 1/8 inch of the label's trailing edge. Try reducing or
moving the format slightly.
The characters may be formatted outside the label dimensions. Ensure the
row/column values provide enough room for the height of the characters or bar
code to be printed. See the Class Series Programmer's Manual for details.
Try this solution...
M-Class