D-Link DSM-G600 Install Manual page 11

DSM-G600 Install Guide
Configuration (continued)
The Wizard will guide you through four
steps:
System
LAN or Wireless
Time
Additional settings
Click Next.
Enter the Server Name. This is the
name of the DSM-G600 device.
Enter and confirm a new password.
Click Next.
Select the type of network: LAN (Wired) or Wireless.
Select either Static or Dynamic IP address. When Static is selected, you will
fill in these fields:
Static IP Address
Subnet Mask
Gateway Address - Usually the LAN
address of your router.
DNS Address - A Domain Name
Server translates Domain names into
IP addresses.
Click Next.
D-Link Systems, Inc.
Configuration
11