Installing The Hardware - D-Link DSM-G600 Install Manual
Wireless network storage enclosure
Hide thumbs
Also See for DSM-G600:
- Install manual (312 pages) ,
- Instruction manual (74 pages) ,
- Manual (66 pages)
Advertisement
Installing the Hardware
Installing the Hardware
A.
Unscrew the two screws
on the back panel of the
DSM-G600 to remove
the cover.
B.
Connect the IDE cable to
the IDE cable connector
on your hard drive.
Note: Make sure the
jumper setting on your
hard drive is set to
Master or Cable Select.
C.
Connect the power cable
to the power connector
on your hard drive.
6
DSM-G600 Install Guide
D-Link Systems, Inc.
Advertisement
