D-Link DSM-G600 Install Manual page 8

Wireless network storage enclosure

Hide thumbs Also See for DSM-G600:

Installing the Hardware

Installing the Hardware (continued)

Connect the antenna to

the antenna connector

located on the back of the

DSM-G600.

Connect the power adapter

to the power receptor on

the back panel. Then plug

the other end of the power

adapter into a wall outlet or

power strip. The Power LED

will turn on to indicate proper

operation.

Note: When you ﬁrst power on, the DSM-G600 will automatically format

your hard drive if it is unformatted. This process may take several minutes

depending on the size of your hard drive. During this process, the power

LED will blink. Once the power LED is solid, you may then access the web

based conﬁguration of the DSM-G600. Do not power the unit off during

this process.

DSM-G600 Install Guide

D-Link Systems, Inc.

Table of Contents