Section - Installation
Codec (Priority 1-3):
Decide and make the codec priority with the supported
audio codec such as G.711 μ-law, G.711 a-law, and
G.729A. The codec at first priority is highly probable to
be used for conversation.
RTP Packet Length:
Select the RTP Packet Length in milliseconds from
the options for each audio codec. It will increase the
network traffic load if a shorter packet length is selected;
however, it may reduce the voice quality if a longer length
is selected.
VAD:
Enable or disable the VAD (short for Voice Activity
Detection) function for silence suppression. When VAD
is ON, the CNG (Comfort Noise Generation) function
will also be activated.
DTMF Method:
The VoIP phone supports three kinds of method to
generate DTMF tones such as Out Band (i.e. RFC
2833), In Band and SIP INFO.
Payload Type:
When Out Band is selected, please also decide and enter the value of Payload Type in the blank. Please contact
your service provider for a suitable type.
Click Submit to save and activate the changes, or Reset to restore the configurations.
D-Link DPH-18MS User Manual
Voice Setting
8