Statically Assign An Ip Address - D-Link DPH-128MS User Manual
D-link dph-128ms: user guide
Hide thumbs
Also See for DPH-128MS:
- Technical specifications (3 pages) ,
- Features and benefits (5 pages) ,
- User manual (8 pages)
Table of Contents
Advertisement
Appendix A - Networking Basics
Statically Assign an IP address
If you are not using a DHCP capable gateway/router, or you need to assign a static IP address, please follow the steps
below:
Step 1
Windows
XP - Click on Start > Control Panel > Network Connections.
®
Windows
2000 - From the desktop, right-click My Network Places > Properties.
®
Step 2
Right-click on the Local Area Connection which represents your D-Link network adapter and select Properties.
Step 3
Highlight Internet Protocol (TCP/IP) and click Properties.
Step 4
Click Use the following IP address and enter an IP address that is on the same subnet as your network or the LAN
IP address on your router.
Example: If the router´s LAN IP address is 192.168.0.1, make your IP address
192.168.0.X where X is a number between 2 and 99. Make sure that the number
you choose is not in use on the network. Set Default Gateway the same as the LAN
IP address of your router (192.168.0.1).
Set Primary DNS the same as the LAN IP address of your router (192.168.0.1). The
Secondary DNS is not needed or you may enter a DNS server from your ISP.
Step 5
Click OK twice to save your settings.
D-Link DPH-18MS User Manual
101
Advertisement
Table of Contents
