Table of contents Figures ..................................... 1 Preface .................................... PAK-M specifics ..............................2 Safety ....................................Classification of important information ......................Overall PAK-M safety ............................3 Description ..................................Main parts ................................Collecting bin ............................... Feed out devices ..............................Filters ................................... Accessories .................................
PAK-M 1 Preface NOTE! • For each variant of PAK-M: Manuals are sep- Thank you for using a Nederman product! arated into User Manuals, Installation and The Nederman Group is a world-leading supplier and Service Manuals, a Program Manual and ac- developer of products and solutions for the environ- cessory manuals.
3.3 Feed out devices al or thermal reactions and/or self-ignite. • Each PAK-M system must be dimensioned in- If a different feed-out device is used, like TVFD, but- dividually. To ensure that your system will be...
• The support leg must be firmly anchored to Make sure the outside, particularly the solenoids, the floor. See Figure 1, item 4. sensors and connection box, are free from dust layers. 4 Make sure the inside of PAK-M and the connection pipes are free from deposits.
• Tilting requires the support, accessory, leg to CAUTION! Risk of equipment damage be fitted. Use only Nederman original spare parts and ac- • You need to make a gap of around 4 mm cessories. between the leg and the Vacuum and Control unit in order to tilt the filter.
Need help?
Do you have a question about the PAK-M and is the answer not in the manual?
Questions and answers