NetComm NL20MESH Quick Start Manual page 7

Step 1: Power on the NetComm NL20MESH
Wait a few minutes for it to start up.
Step 2: Connect your NetComm NL20MESH
Depending on your NBN technology type, your NetComm NL20MESH will connect differently. If you are unsure
of your NBN technology type, it is listed in your NBN ordered email.
If your NBN connection is:
Hybrid Fibre Coaxial (HFC)
Fibre to the Premises (FTTP
Fibre to the Curb (FTTC)
NetComm NL20MESH6 Quick Start Guide
Instructions:
Connect the ethernet cable from the WAN port on the NetComm
NL20MESH to the UNI-D port on your nbn® connection box. Connect
the power adaptor from the power supply jack to the power outlet.
7
more.com.au