Installing The Main Unit - Clarion VRX775VD Owner's Manual & Installation Manual

5. INSTALLING THE MAIN UNIT

Universal Mount
1. Place the universal mounting bracket into the
instrument panel, use a screwdriver to bend
each stopper of the universal mounting
bracket inward, then secure the stopper as
shown in Figure 6.
2. Wire as shown in Section 8 (see page 75).
3. Insert the main unit into the universal
mounting bracket until it locks.
4. Mount the outer escutcheon so that all the
hooks are locked.
• Console opening dimensions
7-3/16" (182 mm)
Hole
Screwdriver
Outer escutcheon
72
Hole
Stoppers
Main unit
2-Spring
Note: Set the outer escutch-
eon so that its metallic
part on the back side
fits the upper edge of
the main unit.
Figure 6
Note:
*1: Some car models require special mounting kits
for proper installation. Consult your Clarion
dealer for details.
*2: Fasten the front stopper securely to prevent the
main unit from coming loose.
Strap
* This part is not provided.
Instrument panel
Universal mounting bracket
Stoppers
Hexagonal
bolt