Clarion VRX775VD Owner's Manual & Installation Manual page 29

Basic Operations
Monitor image and sound with 2-ZONE ON/OFF
●With 2-ZONE function OFF
Visual
connection
[OTHER] (*1)
Front monitor Displays image of
(liquid crystal device connected
panel) to the Visual
terminal. (*3)
Rear monitor Displays image of mode selected from the Source menu. (*2)
(optional)
Audio output Sound from mode selected from the Source menu is output from 4ch speaker,
NON-FADER, and AUDIO-OUT.
●With 2-ZONE function ON
Visual
connection
[OTHER] (*1)
Front monitor Displays image of
(liquid crystal device connected
panel) to the Visual
terminal. (*3)
Rear monitor Displays image of mode selected from the Source menu in the SUB zone mode.
(optional) (*2)
Audio output • Sound from mode selected in the MAIN zone mode is output from 4ch speaker,
• Sound from mode selected in the SUB zone mode is output from SUB-OUT.
*1: A device connected to the Visual terminal should be set up as described in the section "Switching
CONNECT (connect)" (see page 28).
*2: No image is displayed on the rear monitor when a non-image mode such as CD changer mode, etc.
is selected.
*3: For safety reasons, this image is not displayed when the vehicle is moving. The picture can be
watched only when the vehicle is stopped and the parking brake is applied.
Note:
• The steering wheel remote control operations work upon the MAIN zone even when the SUB zone is selected.
Front monitor lock ON
Visual
connection
[NAVI] (*1)
Displays image of
device connected
to the Visual
terminal.
Front monitor lock ON
Visual
connection
[NAVI] (*1)
Displays image of
device connected
to the Visual
terminal.
NON-FADER and AUDIO-OUT.
Front monitor lock OFF
Visual Visual
connection connection
[OTHER] (*1) [NAVI] (*1)
Displays image of mode selected from
the Source menu.
Front monitor lock OFF
Visual Visual
connection connection
[OTHER] (*1) [NAVI] (*1)
Displays image of mode selected from
the Source menu in the MAIN zone
mode.
31