Rack Mounting - TRENDnet TEG-S224TXA User Manual

26-port 10/100/1000mbps smart copper gigabit switch with 2×1000base-t + 24×10/100base-tx ports

Hide thumbs Also See for TEG-S224TXA:

Table of Contents

Figure 1. Attach the adhesive rubber pads to the bottom

Rack Mounting

The Switch can be mounted in an EIA standard-size, 19-inch

rack, which can be placed in a wiring closet with other

equipments. Attach the mounting brackets to both sides of the

Switch (one at each side), and secure them with the provided

screws.

Figure 2. Combine the Switch with the provided screws

Then, use screws provided with the equipment rack to mount the

Table of Contents