Rexing RH2-2 Quick Start Manual page 9

Step 4: Power the Camera and Format the Memory Card
Power the camera by connecting the charger to the car cigarette
lighter and the camera
To ensure the RH2-2 records to your memory card properly and
without error. Before you start using a new memory card, you must
format the card within the camera using the format function.
Always backup important data stored on the memory card before
formatting.
To format the memory card, make sure you have inserted your
memory card, then turn on the device by connecting to a power
source. Press button to stop recording. Then press the
UP MENU
button twice to enter the system Setup Menu. Use the and
UP
buttons and go to the Format settings. Press the Button
DOWN OK
to confirm the selection.
1 8