Rexing RH2-2 Quick Start Manual page 7

Instalation
Step 1: Installing the Electrostatic Stickers
1.1 Prepare Your Windshield
Thoroughly cleanse your windshield with either water or alcohol.
Follow this by wiping it dry using a clean, dry cloth to ensure a
spotless surface.
1.2 Position the Sticker
Next, carefully peel off the protective film from the electrostatic
sticker. Attach the sticker to the windshield, ideally behind the
rear-view mirror. This position is recommended to avoid
obstructing your view while you're on the road.
Electrostatic
sticker
Step 2: Install the Dash Cam
Place the 3M adhesive on the mount plate and properly orient
the mount piece to the roof and hood line of the vehicle.
1 6