Duplex Operation; Programming Duplex Mode - Icom IC-A20 Owner's Manual

6. DUPLEX OPERATION
1) Set a NAV frequency.
PROGRAMMING DUPLEX MODE
2) Push the KEY then push the [5] KEY.
3) Set the desired transmit frequency on COM BAND then push the
KEY. |
e The transmit frequency is stored. (See EXAMPLE 11)
4) The duplex condition can be programmed in memory channels in
which the NAV frequency is programmed. (See EXAMPLE 12)
EXAMPLE 11: Programming 121.20MHz for transmit frequency in DUPLEX MODE.
Push keys
Display
EXAMPLE 12: Programming the duplex condition in memory channel 16 in which 117.10MHz has already been
programmed.
Push keys
Display