Operating Memory Scan - Icom IC-A20 Owner's Manual

1) Push KEY. 1) Push-the KEY to select MEMORY CHANNEL MODE.
2) Adjust [SQUELCH] CONTROL.
2) Adjust the [SQUELCH] CONTROL
to set the transceiver for
scan operations.
e "[RX]" disappears from the FUNCTION
DISPLAY.
3) Push CEJ] KEY then push Ca] or LV] KEY. 3) Push the KEY then push either the [a ] or [Y ] KEY to
start the scan.
e The decimal point blinks while in scanning operation.
e The scan stops while receiving the signal. The scan resumes
after the signal disappears.
4) Push KEY. 4) Push the KEY to cancel the scan.
EXAMPLE 7: Operating FULL SCAN in an upwards direction.
Push keys