Icom IC-A20 Owner's Manual page 20

SSA. by ee
m PROGRAMMING LOCKOUT CHANNEL
(See EXAMPLE 9)
1) Push CF] KEY.
2) Select the desired memory channel.
3) Push Că] KEY then push Cs] KEY.
4) Push KEY.
M OPERATING LOCKOUT SCAN
(See EXAMPLE 10)
1) Push KEY.
2) Adjust [SQUELCH] CONTROL.
3) Push KEY then push [a] or Cv] KEY.
4) Push KEY.
1) Push the KEY to select MEMORY CHANNEL MODE.
2) Push keys for a memory channel you do not want to receive in
while scanning then push the KEY. (See page 13)
3) Push the KEY then push the LSJ KEY.
4) Push the KEY to return to NORMAL MODE.
1) Push the KEY to select MEMORY CHANNEL MODE.
2) Adjust the [SQUELCH] CONTROL to set the transceiver for
scan operations.
3) Push the CE] KEY then push either the [a] or LY] KEY to
start the scan.
e The decimal point blinks while in scanning operation.
e The scan stops while receiving the signal. The scan resumes
after the signal disappears.
4) Push the KEY to cancel the scan.