Noise Limiter - Icom IC-A20 Owner's Manual

Le Ne Rg ee ee ee CE.
1) Turn power ON.
2) Set the desired frequency.
3) Adjust [VOLUME] CONTROL.
4) Adjust [SQUELCH] CONTROL.
5) Push IN [ANL] SWITCH.
6) " appears.
1) Turn the transceiver power ON.
2) Set the desired frequency. (See page 7)
e Receive frequency range: 108.000 ~ 135.975MHz
3) Adjust the [VOLUME] CONTROL to a suitable listening level.
4) Adjust the [SQUELCH] CONTROL until the speaker noise is
quieted.
e "(RX)" disappears from the FUNCTION DISPLAY.
5) Push IN the AUTOMATIC NOISE LIMITER [ANL] SWITCH to
reduce pulse-type noise such as that caused by engine ignition
systems.
6) "(kx)" appears on the FUNCTION DISPLAY when the transceiver
receives a signal.
S40 RE