Table of Contents
Advertisement
Admin Guide > Automatic Routing and PBX Integration
For Routing Type, make sure the PBX/DID radio button is selected.
See DTMF Automatic Fax Routing on page 90 for more information regarding
DTMF routing.
If the trunk or lines provided by your phone company are inbound only lines, as is
the case with DID trunk lines, make sure the Line Direction section's Input Only
radio button is selected. Otherwise, select Bi-Directional.
Although this is not specifically required for automatic inbound routing, make sure
any prefix your PBX system requires for accessing Local, Long Distance, and
International outside phone lines is entered in the PBX Pre-dial section. FaxPress
automatically inserts a 3 second pause after the PBX pre-dial code. This means
that you do not have to insert a comma after the PBX digits.
3.
Select the Dialing Properties tab. The information here is required for PBX
outbound integration, but is not specifically required for automatic inbound
routing.
FaxPress Administrator Guide
83
Advertisement
Table of Contents
