Table of Contents
Advertisement
For the Terminal Server to be in install mode and for the required compatibility scripts to
run during setup, you will have to exit out of the FaxPress setup, and install the
FaxPress client from the Windows Add/Remove Programs Control Panel.
Installing the FaxPress client from Add/Remove Programs in the Control Panel
automatically puts the Terminal Server in install mode. In fact, if you are running the
installation on a Windows 2000/2003 server, the following message will appear when the
FaxPress setup is launched.
Follow these steps to install the FaxPress client for Terminal Server:
1.
Place the FaxPress Setup CD into your computer's CD-ROM drive.
2.
Hold down the Shift key to disable the auto-run feature on the CD-ROM.
Note: The Terminal Server must be in install mode for the required
compatibility scripts to run during setup. You must install the FaxPress client
from Add/Remove Programs in the Control Panel to automatically put the
Terminal Server in install mode.
3.
Open the Control Panel. (
4.
Double-click on Add/Remove Programs.
5.
From the Add/Remove Programs Properties window, click Install.
FaxPress Administrator Guide
Admin Guide > Installing the FaxPress Client on Terminal Server
Start>Settings>Control Panel
)
464
Advertisement
Table of Contents
