Table of Contents
Advertisement
When the local server sees a fax number, it will parse it per the criteria you set in
the Country Code, Area Code and Fax Number (or prefix) fields to determine
whether it should be sent to the specified remote server. You can specify phone
number criteria in terms of country code, area code, and fax number or fax
number prefix.
At a minimum, only one of the three criteria boxes needs to be filled in. If two or
more boxes are filled in, the specifications will be applied using logical AND. For
example, if only the country code is filled in, then all faxes with that country code
will be sent to the specified server. If all three boxes are filled in, then faxes will
be sent to the specified server if the number has the same country code AND the
same area code AND the same fax number or fax number prefix.
Depending upon how you fill in these boxes, you can specify sending to a remote
server:
All faxes with a specified country code.
All faxes with a specified country code AND area code.
All faxes with a specified country code AND area code AND local prefix.
All faxes with a specified country code AND area code AND local number.
Country Code — Enter a country code and leave the area code and fax number
blank to instruct your FaxPress to send all faxes with this country code over the
Internet rather than via the fax modem. (The United States' country code is 1.)
Area Code — Enter an area code and leave the fax number empty to instruct your
FaxPress to send all faxes with this area code over the Internet rather than via the
FaxPress Administrator Guide
Admin Guide > Internet Faxing
489
Advertisement
Table of Contents
