Technical Specifications; Technical Support And Warranty - cecotec CONGA 9590 SPIN REVOLUTION ULTRA POWER Instruction Manual

ENGLISH
The robot vacuum cleaner did not carry
out the scheduled cleaning task
The robot vacuum cleaner does not
return to the charging base after spot
cleaning or after changing the starting
position
The robot vacuum cleaner does not
resume cleaning
The robot vacuum cleaner is always
offline
The connection between the
smartphone and the robot vacuum
cleaner failed

6. TECHNICAL SPECIFICATIONS

Product: Conga 9590 Spin Revolution Ultra Power
Product reference: EU01_100145
Voltage: 19V DC 1A
76
CONGA 9590 SPIN REVOLUTION ULTRA POWER
Check if the robot vacuum cleaner is in Sleep
mode and change mode. This option can be
found on the general settings of the robot
vacuum cleaner and allows you to define time
slots in which the robot will not perform the
scheduled cleaning tasks when in Sleep mode.
Ensure proper connection of the robot
vacuum cleaner to the Wi-Fi: you will not be
able to carry out scheduled cleaning without
connection and with a low battery.
The robot vacuum cleaner will map and
calculate a new route after running in Spot
cleaning mode or after changing its starting
position.
If the charging base is very far away from the
robot vacuum cleaner, it will not be able to
charge back automatically. Manually move the
robot vacuum cleaner to the charging base.
Make sure the robot vacuum cleaner is not in
Sleep mode, as it will not resume cleaning in
this mode.
It will not resume cleaning when it is manually
placed on the charging base.
Make sure the robot is successfully connected
to the network and always in areas with a
good Wi-Fi signal.
Make sure the robot vacuum cleaner and the
charging base are in an area with good Wi-Fi
signal, reset the router, and retry connection.
Rechargeable Li-ion battery
Rated capacity: 14.4 V ⎓ 5200 mAh
Wi-Fi connection: 802.11a/b/g/n/ac MIMO technology and Bluetooth can support BT2.1+EDR/
BT3.0 and BT4.2
Maximum power transmission: 20 dBm
Product: Charging base
Input: 220-240 V ~ 50/60 Hz
Output: 19V DC 1.A
Technical specifications may change without prior notification to improve product quality
Made in China | Designed in Spain
7. DISPOSAL OF OLD ELECTRICAL AND ELECTRONIC APPLIANCES
This symbol indicates that, according to the applicable regulations, the product
and/or batteries must be disposed of separately from household waste. When
this product reaches the end of its shelf life, you should dispose of the cells/
batteries/accumulators and take them to a collection point designated by the
local authorities.
For detailed information on the most appropriate way to dispose of electrical
and electronic equipment and/or batteries, consumers should contact their local
authorities.
Compliance with the above guidelines will help protecting the environment.

8. TECHNICAL SUPPORT AND WARRANTY

Cecotec shall be liable to the end user or consumer for any lack of conformity that exists at the
time of delivery of the product under the terms, conditions, and deadlines established by the
applicable regulations.
It is recommended that repairs be carried out by qualified personnel.
If at any moment you detect any problem with your product or have any doubt, do not hesitate
to contact the official Cecotec Technical Support Service at +34 963 210 728.
ENGLISH
CONGA 9590 SPIN REVOLUTION ULTRA POWER
77