Wireless Setup Using Wcn (Windows Connect Now) - Canon PIXMA MP560 Series Getting Started

Reference Information

Wireless Setup Using WCN (Windows Connect Now)

Set up a wireless connection by using the
WCN (Windows Connect Now) function of
Windows Vista.
• Before setting up by using the WCN, establish
wireless communication between the computer
and the access point.
• Canon assumes no responsibility for any
damage or loss of data stored on your USB flash
drive regardless of the cause even within the
warranty period.
• If your USB flash drive cannot be attached to the
Direct Print Port of the machine, a commercial
extension cord (for USB flash drives) may be
required.
• Operation may not be guaranteed depending on
your USB flash drive.
• USB flash drives with security enabled may not
be used.
• The machine supports "WCN-UFD".
 Reference Information
1
From the Start menu of Click Add a wireless device
the Windows side, click on the menu.
Network.
The Add a wireless device to the
network screen will be displayed.
The Network folder opens.
2 3
Click I want to add a wireless device
or computer that is not on the list,
using a USB flash drive.