Canon PIXMA MP560 Series Getting Started page 11

3
Tilt the ink tank, then insert it under the label and
against the back end of the slot.
Make sure that the color of the label matches the ink
tank.
• Install in a well-lit environment.
4
Press the PUSH mark on the ink tank firmly until
it clicks.
When the installation is completed properly, the Ink
lamp lights red.
5
Install all the other ink tanks in the same way.
Install all the ink tanks.
Make sure all the Ink lamps light red.
• Once you have installed the ink tanks, do not remove them
unnecessarily.
Install the Ink Tanks
Hardware Setup