Canon PIXMA MP560 Series Getting Started page 12

Install the Ink Tanks
6
D
E
Lift the Scanning Unit (Cover) (D) slightly, then gently close it.
Close the Paper Output Tray (E).
• Wait until the LCD changes as shown in the illustration (about 3 minutes) and go to the next step.
• The machine may make some operating noises when preparing to print. This is normal operation.
• If an error message is displayed on the LCD, make sure that the Print Head and the ink tanks are correctly installed.
0 Hardware Setup
7
F
Load a sheet of A4 or Letter-sized plain paper into the
Cassette (F), then press the OK button.
• For details, refer to "Loading Paper" on page 42.