Canon PIXMA MP560 Series Getting Started page 30

Confirm Connection Status
4
Select Confirm LAN settings, then press the OK
button.
 Wireless Connection
5
Select Wireless LAN setting list, then press the OK button.
Make sure that Connection is set to Active, then press the HOME button.
It may take a while before the connection is complete. In this case, press the Back button (C) and wait for about
a minute, then display the Wireless LAN setting list screen again.
• If the communication status does not improve, make sure of the following.
− The machine and access point are turned on.
− There is no obstacle between the machine and access point, and wireless communication is possible.
− There is no microwave, refrigerator or any other object that may cause radio interference nearby.
Now the machine is connected to the network.
Next, read "[Wireless Connection] Install the Software" on page 29.
C