Related Manuals for Proline PLFI Flush Mount Island Pro.42
Summary of Contents for Proline PLFI Flush Mount Island Pro.42
- Page 1 Flush Range Hood Installation Guide IMPORTANT: Read and save these instructions. NOTICE: Installer: Leave this guide with the homeowner Homeowner: Keep this guide for future reference...
-
Page 2: Table Of Contents
Proline Flush Mount Range Hood Installation Guide Table of Contents Before the Installation ........3 What You Will Need . -
Page 3: Before The Installation
Before the Installation The installation of the 44" Flush Island Pro range hood is meant for contractors or licensed installers only. Do not install this island hood yourself. You risk costly damage to the structural integrity of your home as well as injury. 1. -
Page 4: Decide Where To Install Your Flush Island Hood
Proline Flush Mount Range Hood Installation Guide Decide Where to Install Your Flush Island Hood min. 13-3/4" max. 22-1/4" Build the Wood Frame Double Headers 1 1 1" 1" 11" 1 1 1" 1" 11" ⁄ " ⁄ " ⁄ ⁄... -
Page 5: Install The Hood
The hood must be centered over the cooktop. Make sure there is enough room in your ceiling for the 44" hood and its ductwork. For the best performance, mount your hood between 36" and 72" above the cooktop. You may need to cut the joists in your ceiling to make room for this frame. Use joist-size lumber to build the range hood frame. - Page 6 Proline Flush Mount Range Hood Installation Guide 4. Lift range hood into the ceiling opening. Ask a friend for help so you don’t risk an injury. The range hood is quite heavy. 5. Use the lag bolts and washers to secure the wooden support in place.
-
Page 7: Operations
9. Reinstall the grease filters. Operations Power button Press the power button to turn the hood on. When the hood is on, press the button again to start a 15 minute timer. When the timer runs out, the hood will turn off. Press the power button a third time to turn off the range hood. - Page 8 Proline Flush Mount Range Hood Installation Guide Before replacing your range hood lights, make sure that they are turned off and the range hood is unplugged. 1. Open the front panels of the island range hood. 2. Carefully remove the LED lights from their connectors using a flat tip screwdriver or similar tool.
-
Page 9: Safety Information
• Clean your range hood filters, grease trays, and the range hood every few weeks. Heavy grease buildup shortens the life of your hood and it may lead to a grease fire. • All Proline range hoods are ETL certified. They meet all industry standards and regulations to ensure your safety. -
Page 10: Warranty Information And Return Policy
If you’re outside of the warranty and your hood is not working properly, call us at (877) 901-5530 and we’ll help you resolve your issue. We can typically help fix your Proline range hood at a reasonable price so you don’t have to replace the whole thing. - Page 12 Proline Flush Mount Range Hood Installation Guide 4375 W 1980 S, Salt Lake City, UT 84104 Call (877) 901-5530 support@prolinerangehoods.com www.prolinerangehoods.com Our Support team hours are: Mon-Fri 8:30 am – 5:00 pm MST...
Need help?
Do you have a question about the PLFI Flush Mount Island Pro.42 and is the answer not in the manual?
Questions and answers