INTERFACE
SELECT
AUTO IF TIME
INPUT BUFFER
PARALLEL
RESET MENU
RESET PRINTER
FACTORY RESET
PARTS LIFE
Menu
AUTO/PARALLEL/USB/NETWORK
1:5:99 (sec)
LEVEL 1:3:15
HIGH SPEED
BI-DIR
Menu
FUSER UNIT
You need to set the time-out period for the
auto interface selection.
Increase or decrease the input buffer
capacity.
When using the parallel interface
Turns high-speed parallel communications
ON/OFF
on or off.
Turns bi-directional parallel communications
ON/OFF
on or off.
Resets the printer and restores all printer
settings (including command settings) to
settings you have previously made with the
control panel buttons.
Resets the printer and restores all printer
settings (including command settings) to the
factory settings. See List of factory settings
on page 4-23.
Resets the fuser unit. See Replacing the
Fuser Unit & Transfer Roll Cartridge
(FP-8000) on page 6-5.
Description
Description
CONTROL PANEL 4 - 20