Printing On Transparencies From The Paper Tray - Brother HL-8050N User Manual

9
Push the paper tray completely into the printer.

Printing on Transparencies from the Paper Tray

When printing on transparencies or specialty paper, make sure that you select the type of paper and
image quality before sending the print command.
■
Use only transparencies that are designed for use with laser printers and for black and white
printing.
■
Use only the recommended type of transparencies (See Special paper on page 2-4). Do not use
any other type, such as color transparencies (bordered with a white frame).
■
Using unsuitable transparencies can cause damage to the printer.
■
Do not use transparencies bordered with a white frame.
■
Remove each transparency sheet from the face down output tray as soon as it is printed. When
transparencies are allowed to accumulate in the face down output tray, static electricity can build
up and cause jams.
Transparencies can be fed from trays 1, 2, 3 and 4. When feeding transparencies from trays 1, 2, 3
and 4, load plain paper to about 30 mm (about 1.2 in.) in height in the tray first, and then load
transparencies on top of the plain paper up to the maximum fill line. In this case, up to 100 sheets of
transparencies can be loaded.
USABLE PAPER TYPES AND PRINTING METHOD 2 - 23