Brother HL-8050N User Manual page 136

5
Close the offset catch tray cover.
6
Open the back cover by lifting up the lower gray lever at
the top left corner of the back of the printer.
7
Remove any jammed paper. If paper is torn, check for any
remaining torn pieces of paper.
■
The fuser unit is hot. Be careful not to touch it as you
can get burnt.
■
Make sure that the levers at both ends of the fuser unit
are returned to the positions they were in before
clearing the jam.
If you let go of the cover of the fuser unit, it will return to its
original position.
TROUBLESHOOTING 5 - 30