Operating Environment - Brother HL-8050N User Manual

When moving the printer, do not tilt it more than the angles shown in the illustration below.
If tilted excessively, the printer may fall, resulting in injuries.
■
Use the printer in a place that meets the following requirements:
Ambient temperature range of 10 to 32 °C (50.0 to 89.6 °F), relative humidity of 15 to 85% (no
condensation)
When using the printer at an ambient temperature of 32 °C (89.6 °F), the relative humidity should not
exceed 65%. When the relative humidity reaches 85%, the ambient temperature should not exceed
28 °C (82.4 °F).
■Do not place the printer in a room where there are sudden fluctuations in temperature and
do not move the printer from a cold place to a warm humid place. If you do, condensation
may occur inside the printer and deteriorate print quality.
■Do not place the printer in direct sunlight, as this may damage the printer.
■When moving the printer, remove the toner cartridge.
■Do not place the printer directly next to an air conditioner or heater, as this affects the
temperature inside the printer and can cause damage.
■Do not use the printer when it is tilted at an angle of more than 5 degrees, as this may
result in damage.
10° 10°

Operating Environment

10° 10°
XXI