List Of Factory Settings - Brother HL-8050N User Manual

List of factory settings

The following table shows the factory settings. To reset the printer's network settings, see Network
Factory Default Setting on page 3-18.
■
The emulation mode affects the setting. Effective modes are shown in brackets in the following
table.
■
The following settings can not be restored to the factory settings with the reset menu in the
factory settings mode interface mode, HRC setting, page protection, scalable font, lock panel,
page counter and local language for display messages.
■
The copy setting is always restored to the factory setting when the printer is turned off and on
again.
PAPER SOURCE
PRIORITY
MANUAL FEED
TRAY1 SIZE
TRAY2 SIZE
TRAY3 SIZE
TRAY4 SIZE
DUPLEX
OUTPUT
JOB OFFSET
QUALITY RESOLUTION
HRC
TONER SAVE
DENSITY
SETUP LANGUAGE
PANEL CONTROL
POWER SAVE TIME
AUTO CONTINUE
TONER LOW
4 - 23 CONTROL PANEL
Menu
LOWER LCD
AUTO ONLINE
BUTTON REPEAT
MESSAGE SCROLL
Factory Setting
AUTO
T1>T2>T3>T4
OFF
DETECT SENSOR
DETECT SENSOR
DETECT SENSOR
DETECT SENSOR
OFF
STANDARD
ON
600
MEDIUM
OFF
0
ENGLISH
NONE
ON
0.1 SEC
LEVEL 1
30MIN
OFF
CONTINUE