Daewoo DLT-32G1 Instruction Manual

Daewoo lcd television instruction manual

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

LCD TELEVISION

INSTRUCTION MANUAL

DLT-32G1

DLT-37G1

DLT-42G1

Table of Contents

Need help?

Do you have a question about the DLT-32G1 and is the answer not in the manual?

Questions and answers

Summary of Contents for Daewoo DLT-32G1

Page 1 LCD TELEVISION INSTRUCTION MANUAL DLT-32G1 DLT-37G1 DLT-42G1...
Page 2 CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning ﬂash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage”...
Page 3: Important Safeguards
Please read the following safeguards for your TV and retain for future reference. Always follow all warnings and instructions marked on the television. 1. Read, Retain and Follow All Instructions Read all safety and operating instructions before operating the TV. Retain them safely for future reference. Follow all operations and instructions accordingly.
Page 4 Important Safeguards 12. Power Lines An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, ex- treme care should be taken from touching such power lines or circuits as contact with them might be fatal.
Page 5 This section must be read carefully and followed by the user prior to the operation of the product. The manual states important instructions for the user’s own safety, and the proper operation of the product. WARNING In case of an accident, please unplug the unit from the outlet immediately. To reduce the risk of electric shock, do not remove cover or back.
Page 6 This section must be read carefully and followed by the user prior to the operation of the product. The manual states important instructions for the user’s own safety, and the proper operation of the product. CAUTION Please keep the user’s manual in a safe place for future reference. Do not view the TV too close- ly since it may cause damage to your eyes.
Page 7: Table Of Contents
Installation and Maintenance Antenna Connection ......9 Video Connection ......12 Camcorder &...
Page 8: Supplied Accessories
Accessories Make sure that the following accessories are provided with the product. AC lead Remote control Cable holder The method of wire arrangement 1. Assemble the cable holder enclosed on the back of TV. (PICTURE1) (ASSEMBLY METHOD: After you push the (peg part of cable holder) „A”...
Page 9: Antenna Connection
Indoor Antenna Connection Not recommended unless very close to the transmitter Not recommended unless very close to the transmitter. 1. Connect the feeder cable of the antenna to the combining adapter. WHEN THE IMAGE IS NOT CLEAR : Unclear screen image and bad reception may be a cause of a wrong antenna 2.
Page 10 Antenna Connection CTV Antenna Connection Such community TV Antenna installation may be found in most of communial apartments. When a coaxial cable is used : Plug the coaxial cable to the antenna socket, and ﬁx it ﬁrmly by turning it to the right. Antenna socket on the wall Antenna socket at the left side of the TV set ANT/CABLE...
Page 11: Outdoor Antenna Connection
Outdoor Antenna Connection An outdoor Antenna connection-such as VHF and/or UHF-may be necessary for installation in private houses. Single Antenna Connection UHF Antenna Separate Antenna Connection. VHF Antenna UHF Antenna Antenna Connection VHF Antenna ANT/CABLE In case of coaxial cable In case of feeder cable Left side of the tv set UP-GRADE...
Page 12: Video Connection
Video Connection Connecting with an External Source You may connect an S-Video input to enjoy clearer and brighter picture images. You can make the connection with the AV3 input. S-Video Note : If S-video and the RCA phono jacks are connected at the same time, the TV set will only detect the S-Vid- eo mode.
Page 13: Camcorder & Video Game Connection
Watching a Camcorder Recording on TV or playing a Video Game 1. Prepare the S-video and RCA connector. 2. These connectors connect to S-video or AV 3 as shown in the picture below. 3. Turn on the TV set and camcorder/video game. 4.
Page 14: Dvd Player Connection
DVD Player connection When connecting with a component cable or Euro SCART cable INPUT HDMI 1 HDMI 2 OPTICAL COMPONENT DIGITAL AUDIO PC INPUT R - AUDIO - L PC AUDIO Back of the tv set Note : • You can use a scart cable but some DVD’s have a component output for a better picture. •...
Page 15: Stb(Set Top Box) Connection
When connecting with a HDMI cable Back of the tv set INPUT HDMI 1 HDMI 2 OPTICAL DIGITAL AUDIO PC INPUT R - AUDIO - L PC AUDIO Set Top Box When connecting with a component cable Back of the tv set INPUT HDMI 1 HDMI 2...
Page 16 Connection When connecting with PC(D-Sub) cable. 1. First adjust resolution of the PC. (Refer to table in page 17.) 2. Then disconnect your monitor from your PC and connect between PC and TV set using the D-sub and Audio ca- ble as shown in the picture below.
Page 17: Pc Connection
PC CONNECTION NOTES: 1) The resolution of the TV set is best at 1360(6) x 768(WXGA). 2) If there is a [Vertical Frequency] setting menu in the [Display] Menu of the PC, adjust the frequency to 60Hz. 3) If the PC resolution is too high, it may be hard to detect signals. Select a suitable resolution. 4) HDMI input port receives only digital Signal.
Page 18: Cable Tv Broadcasting Connection
Broadcasting Connection External Input Connection Source Watching cable television is only possible after you have subscribed to the local broadcasting company and installed a cable receiver. You may make the connection to either the Component input or SCART input AV1 or AV2. Back of the tv set INPUT HDMI 1...
Page 19: Connect With The Dolby Digital Amp
If you connect the optical output to a Dolby digital AMP, you can listen to better quality sound. (Only DVB-T Mode) HDMI 1 DIGITAL AUDIO PC INPUT Optical output Dolby Digital AMP Surround L Connect with the Dolby Digital AMP. Back of the tv set INPUT HDMI 2...
Page 20: Name Of Each Part
Name of Each Part Front / Side Panel The buttons on the TV set have the same functions as those of the remote control. Control Key Buttons. ① TV/VIDEO Button : Each time you press this button, the TV will cycle through: TV / AV1 / AV2 / AV3(S-Video) / COMP / PC / HDMI1 / HDMI2.
Page 21: Side And Rear Panel
Name of Each Part Side and Rear Panel Side Panel Rear Panel INPUT HDMI 1 HDMI 2 OPTICAL COMPONENT DIGITAL AUDIO PC INPUT UP-GRADE PORT R - AUDIO - L PC AUDIO...
Page 22: Parts Of The Remote Control
Parts of the Remote Control MUTE POWER MULTI DVB/Analog MEDIA NORMAL PR / PAGE OK / SELECT PR / PAGE GUIDE SUBTITLE LANGUAGE FAVOURITE CANCEL / EXIT MENU ASPECT RECALL S.EFFECT YZ&. STILL SLEEP TEXT REVEAL T.CANCEL SIZE S-CODE HOLD INDEX P.MODE P.STILL...
Page 23 MUTE POWER MULTI DVB/Analog MEDIA NORMAL PR / PAGE OK / SELECT PR / PAGE GUIDE SUBTITLE LANGUAGE FAVOURITE CANCEL / EXIT MENU ASPECT RECALL S.EFFECT YZ&. STILL SLEEP TEXT REVEAL T.CANCEL SIZE S-CODE HOLD INDEX P.MODE P.STILL P.SWAP P.PR▲ P.INPUT P.SIZE P.PR▼...
Page 24: Method To Use Basic Menu
Method To Use Basic Menu - The basic menu appears on the screen if you press the “MENU” button of the remote control. - There are 6 items Picture, Screen, Sound, Install, Function and DVB in the basic menu. - Each item has sub-items under it. If the desired item is selected, the relevant sub-items are displayed upward. 1.
Page 25: To Watch Tv
On/Off, Number, Mute, Recall, VOL , PR Buttons with same name in the main body of the TV performs the same function. Press the “ON/OFF” button on the side of the set or Remote control. • The buttons on the remote control and the main body operate only when AC power is turned on.
Page 26: Adjust Volume
To Watch TV - If the AV1 terminal on the TV set is connected with an external device, which is switched on, the TV will be ON at AV1 mode. Otherwise, TV will be ON at RF mode. 1. Turning on the TV. •...
Page 27: Setting Up Tv Stations
- All stations that can be received are stored by this method. It is recommended that you use Auto tuning during in- stallation of this set. 1. Press the “MENU” button to select the Install menu. • Move the selection bar to the Install menu with “ / ” buttons.
Page 28: Manual Tuning
Setting Up TV 1. Press the Number buttons(0~9) or the “ PR ” but- ton to select a program number you want. 2. Locate the selection bar on the Manual tuning at the Install menu. • Press the “MENU” button to select the Install menu. •...
Page 29: Fine Tuning
The Setup menu shows you information as follows: - Channel, System, Frequency, Station name, Program number and Store to PR number. 1. Searching for channels in the Setup menu • Press the “ PR “ buttons to select a program number you want.
Page 30 Setting Up TV The Edit menu shows you information as follows: - Program position assignment: Program number and Station name, Real channel number. - Skip information: Yes or No. 1. Deleting the program positions. • Move to Edit in the Install menu. •...
Page 31: Dvb Menu
- Press the Menu button to display the main menu. Then, select DVB MENU. You may see the DVB MENU OSD. Whenever you need more information during any DVB MENU directory, press info button “ more detailed information on the screen. And in some menus, you can use the cyan, yellow, red, green buttons.
Page 32: Channel List
DVB Menu Channel List 1. BBC ONE 2. BBC TWO 3. ITV 1 4. Channel 4 5. ﬁve 6..Select Move ◄ ► ▲ Function - Select the MOVE function to change the channel number and press the OK. Enter the new number you want and press the OK button.
Page 33 Edit Favourite Lists ① 1. BBC ONE ① 2. BBC TWO 3. ITV 1 4. Channel 4 ① 5. ﬁve 6..List 1 List 2 ◄ ► Select List - This menu allows you to make your favourite channel list. You can make 5 favourite lists. - Move highlight on any list (1~5).
Page 34 DVB Menu Select each sub-menus. Now / Next EPG - You can check now / next program here. Move highlight up/down and get information. - Yellow/cyan button is for changing the schedule. - Press Info key “ ” to see detailed information of each program Now / Next EPG Channels 23.
Page 35 List Schedule EPG - You can check program schedules here. Navigate channel by pressing UP/DOWN/RIGHT/ LEFT button. - Press Yellow/cyan buttons to change date. Red/green buttons are for changing the time. - Press Info key “ ” to see detailed information of each program List Schedule EPG BBC ONE 1.
Page 36 DVB Menu - If you want to watch a special program on time without having to use the remote everyday, please setup Timers. - At ﬁrst, press select key. You will see time setup OSD. (See the right) - You can change channel at Name. - Setting start/end time as you want at Start / End.
Page 37 Select each sub-menu Conﬁguration This has 6 sub-menus. - Change Time Zone : GMT - CET - Subtitle on/off You can also control this with the remote control SUB TITLE button. Note: You can select sub title language in the Features menu. - Change Banner time : off - 1 sec - 2sec - 4sec - 8sec - You can choose your favourite list (see page 33) in Favourite Mode.
Page 38: Installation
DVB Menu Language - System : Select some language, then OSD is displayed in that language: English Spanish Danish Polish Norwegian - Preferred : has two sub menus. Audio is change the audio sound in selected language. Subtitle is change the subtitle display in selected language: English Norwegian Swedish...
Page 39: Interface Commune
Manual Search Channel Number Signal Quality: Very Good Signal Level: 0 .. 9 Select Channel - This allows you to upgrade your TV set with additional features including access to extra channels (if available) using a conditional access module (eg. TopUp TV). - If there is no CI Card in the slot, „No common interface module detected”...
Page 40: Selection Of Av And Multimedia Input Signal
Selection of AV and Multimedia Input Signal When watching video, Camcorder, DVD, Cable TV with AV - See page 12 for connection method of Camcorder and Video. - When pressing ” ” button on the TV set, screen changes as follows: AV3/S-Video 1.
Page 41: Hdmi & Pc Mode
HDMI & PC mode 1. For optimum picture quality, use 1360(6)x768 computer or set top box output at a 60Hz refresh rate. Using other formats or refresh rates may result in reduced picture quality. 2. If the message ‘No signal’ appears on the screen, adjust the PC output to a format listed in the Multimedia In- put table.
Page 42: Screen Adjustment
Screen Adjustment When setting up various screen modes - The user may select various screens designed for a good picture without adjusting the brightness, contrast or col- our individually. 1. Pressing the “NORMAL” button. • The screen changes as follows: Normal Cinema Dynamic...
Page 43 When adjusting the screen to taste - You can enjoy various screens by adjusting Brightness, Contrast, Colour, Sharpness, etc to the user’s taste. 1. Select “Picture” by pressing the “MENU” button. • The menu screen appears as follows. 2. Select and adjust each item. •...
Page 44 Screen Adjustment Adjustment of Screen Size in TV and AV mode - Randomly change the size of the screen. - The AUTO screen operates when power is ﬁrst turned on. 1. Pressing the “ASPECT” button on the remote control. • The screen changes as follows: Full 14:9 Zoom14:9...
Page 45 Adjustment of the screen in the PC mode 1. Auto Adjustment • Move to Auto in the Screen menu. • Press the ” / ” buttons to detect optimal resolution automatically. 2. Adjustment of the H-Position • Move to H-Position in the Screen menu. •...
Page 46: Pip Mode
- The user can enjoy two screens by using PiP function. 1. Adjustment of PiP Mode (Picture in Picture) • Move to Mode in the PiP. • Press the ” / ” buttons to select, PiP mode changes as follow: Side by Side Small PiP Large PiP...
Page 47 5. Pressing the “P.SWAP” button on the remote con- troller. • Switches over the Main and Sub screen. 6. Pressing the “P.INPUT” button on the remote con- troller. • If Sub is on Digital, Switch the Sub screen in the MULTIMEDIA cycle(HDMI1 HDMI2 and COMP aren’t selected because they are on the...
Page 48: Sound Adjustment
Sound Adjustment When adjusting sound to taste - The user can enjoy various sounds by adjusting AVC, Dynamic Bass, Effect, Balance and Equalizer. 1. Select AVC Mode • Select Auto Volume Control On/Off by pressing ” / ” button, then the volume is same every time you switch the TV on.
Page 49 1. Mono Sound Selection • During Stereo sound reception if the stereo is weak, you can switch to MONO by pressing the “ character will change to Red. In Mono reception the depth of sound is improved. • To switch back to stereo, press the “ PR 19 1 2 : 0 0 Note :...
Page 50: Selection Of Language
Selection of Language When you ﬁrst turn on the TV set, the on screen display of language selection is displayed automatically. 1. Press the “MENU” button and select “Function” . 2. Select “Language” by pressing “ / ” button. 3. Select your desired language by pressing the “ / ” button.
Page 51: Manual Clock Setting
- You must previously adjust current time in order to activate Automatic On/Off, switching of Wake Up Time and Sleep Mode. However in the UK the time is set automatically from the broadcast received. 1. Manual clock setting • To go to the Clock, press the “ ” button. •...
Page 52: Other Functions
Other Functions 1. Setup of Child Lock • Move to Child Lock in the Function menu. • Select Child Lock to “On” using the “ ” button Note : • This prevents the use of the TV set without the remote control.
Page 53: Teletext
Teletext Analogue Teletext SWITCHING TELETEXT ON/OFF Press the “TEXT” button ( The index page or the page viewed last will appear. Press the “TEXT” button again to return to the TV mode. NOTE: Teletext works only in TV/AV mode. However digital broadcasts have digital text. To use digital text press the “TEXT”...
Page 54: Troubleshooting
Troubleshooting Please check the following list prior to calling Daewoo Electronics Customer Service Centre for assistance. Symptom Neither picture nor sound Picture is OK but no sound Sound is OK, but no colour. The picture has ghost image. Picture has “snow noise”...
Page 55 Symptom “UNSUPPORTED” appears on the screen “NO SIGNAL” ap- pears on the screen. Image is not clear. Image is not cen- tred. • AFTER SALES SERVICE Do not hesitate to contact your retailer or service agent if a change in the perfomance of your product indicates that a faulty condition may be present.
Page 56: Standard Of Product
Standard of Screen Size Aspect Ratio Resolution Pixel Pitch 170.25um x 510.75um Contrast Ratio Dimension (W x H x D) 806 x 590 x 260mm Weight Power Consumption TV System Power Source ※ Owing to our policy of continuous improvement, speciﬁcations may change. Product 32”(800.4mm) 37”(940.3mm)

This manual is also suitable for:

Dlt-37g1 Dlt-42g1

Daewoo DLT-32G1 Instruction Manual

Quick Links

Need help?

Questions and answers

Related Manuals for Daewoo DLT-32G1

Summary of Contents for Daewoo DLT-32G1

This manual is also suitable for:

Table of Contents