Daewoo DLT-19L1T Instruction Manual
Daewoo DLT-19L1T Instruction Manual

Daewoo DLT-19L1T Instruction Manual

Lcd television
Hide thumbs Also See for DLT-19L1T:

Advertisement

LCD TELEVISION
INSTRUCTION MANUAL
DLT-19L1T
DLT-19L2T
DLT-19W4T
DLT-20J1T
DLT-20J3T
DLT-20J9T
DLT-22L1T
DLT-22L2T
DLT-22W4T
Helpline Number: 0870 100 2525
GB

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DLT-19L1T and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Daewoo DLT-19L1T

  • Page 1 LCD TELEVISION INSTRUCTION MANUAL DLT-19L1T DLT-19L2T DLT-19W4T DLT-20J1T DLT-20J3T DLT-20J9T DLT-22L1T DLT-22L2T DLT-22W4T Helpline Number: 0870 100 2525...
  • Page 2 Caution CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage”...
  • Page 3 Important Safeguards Please read the following safeguards for your TV and retain for future reference. Always follow all warnings and instructions marked on the television. 1. Read, Retain and Follow All Instructions Read all safety and operating instructions before operating the TV. Retain them safely for future reference. Follow all operations and instructions accordingly.
  • Page 4 Important Safeguards 12. Power Lines An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, ex- treme care should be taken from touching such power lines or circuits as contact with them might be fatal.
  • Page 5 Warning This section must be read carefully and followed by the user prior to the operation of the product. The manual states important instructions for the user’s own safety, and the proper operation of the product. Ignoring or disregarding the contents of this section and im- WARNING proper operation of the product may result in the person’s death or serious injury.
  • Page 6 Warning This section must be read carefully and followed by the user prior to the operation of the product. The manual states important instructions for the user’s own safety, and the proper operation of the product. Ignoring or disregarding the contents of this section and CAUTION improper operation of the product may result in the per- son’s death or serious injury.
  • Page 7: Table Of Contents

    Table of Contents Installation and Maintenance Supplied Accessories ......8 Install Stand ........9 Parts of the Remote Control .
  • Page 8: Supplied Accessories

    Supplied Accessories Make sure that the following accessories are provided with the product. Remote control Instruction manual Batteries 2 x 1,5V AAA Cover Stand Base * Frame Stand * Cover Stand Base ** Frame Stand ** Frame Stand Cover ** *) - Screws, Cover Stand Base and Frame Stand are only for DLT-19W4T and DLT-22W4T.
  • Page 9: Install Stand

    Install Stand This page is only for DLT-19W4T and DLT-22W4T. 1. Insert Frame Stand into the Cover Stand Base and insert two screws (Ø3 x 12mm ) in the hole at the bottom of the stand and tighten. * Please insert two screws in the hole at the bottom of the stand. 2.
  • Page 10 Install Stand This page is only for DLT-19L1T/L2T and DLT-22L1T/L2T. 1. Insert Frame Stand Cover into the Cover Stand Base and insert Frame Stand into Cover Stand Base - insert two screws (Ø4 x 14mm ) in the hole at the bottom of the stand and tighten.
  • Page 11: Parts Of The Remote Control

    Parts of the Remote Control MUTE : Press this button, and the sound goes off. Press again, and the sound returns. POWER : TV on/off button in STANDBY mode. 3. DVB/Analogue : Each time you press this button, the TV will toggle between DVB &...
  • Page 12 Parts of the Remote Control 16. LANGUAGE (digital mode only): Moves to multi audio language selection. See page 32. 17. FAVOURITE (digital mode only): Moves to Favourites channel. See page 30. 18. PREV PR : Previous PROGRAMME button in TV mode. 19.
  • Page 13: Name Of Each Part

    Name of Each Part Front LED Indicator LED Indicator DLT-19W4T; DLT-22W4T DLT-20J1T; DLT-20J9T Remote Sensor Remote Sensor PR Up/Down Volume Up/Down Volume Up/Down PR Up/Down Menu Power On/Off Power On/Off Remote Sensor LED Indicator Remote Sensor DLT-19L1T; DLT-22L1T; DLT-20J3T LED Indicator DLT-19L2T; DLT-22L2T...
  • Page 14 Name of Each Part Rear DLT-20J1T / DLT-20J3T / DLT-20J9T DLT-19W4T / DLT-22W4T / DLT-19L1T / DLT-22L1T / DLT-19L2T / DLT-22L2T (1) Component (2) SCART sockets (3) HDMI inputs (4) Headphone jack (5) Audio Input (L+R) Socket (10) (6) Video Input Socket...
  • Page 15: Preparation

    Preparation Inserting Batteries into the Remote Control Unit To load the batteries, turn the remote control handset over and open the battery compartment. Insert the batteries (Two 1.5V, type R03 or AAA). Make sure that the polarity matches with the (+) and (-) marks inside of the battery compartment.
  • Page 16: Antenna Connection

    Connect an aerial cable (75 ohm coaxial cable) to the Aerial terminal on the back of the TV set. DLT-20J1T / DLT-20J3T / DLT-20J9T Aerial Aerial terminal DLT-19W4T / DLT-22W4T / DLT-19L1T / DLT-22L1T / DLT-19L2T / DLT-22L2T Aerial cable...
  • Page 17 Otherwise you will have to use a scart connection from your VCR/DVD to this TV into AV1 or AV2 and select the appropriate AV input on your TV to see VCR/DVD playback. DLT-19W4T / DLT-22W4T / DLT-19L1T / DLT-22L1T / DLT-19L2T / DLT-22L2T...
  • Page 18: External Equipment Connection

    External Equipment Connection External Equipment Connection Component cable Component cable Scart cable Set Top Box VCR/DVD/Camcorder/ Video Game HDMI cable AV cable When you connect with a component video cable, please check the colour of the cable between the DVD and TV set.
  • Page 19: Pc Connection

    PC Connection When connecting with PC(D-Sub) cable. 1. First adjust resolution of the PC (refer to table in page 20). Using the PC’s original monitor. 2. Then disconnect your monitor from your PC and connect between PC and TV set using the D-sub and Audio ca- ble as shown in the picture below.
  • Page 20: Multimedia Connection Notes

    Multimedia Connection Notes Common notes finger or an object like a pen for a long time. It may cause - If you turn on the TV when the TV is cold, small „flicker- some temporary distortion effects on the screen. ing”...
  • Page 21: Digital Amp. Connection

    Digital Amp. Connection If you connect the coaxial output to a digital AMP, you can listen to surround sound and the output will be as shown in the table below. Connector Mode Output TV(RF), AV1 TV Out Coaxial Monitor Out output Component, HDMI, PC Back of the tv set...
  • Page 22: Method To Use Basic Menu

    Method To Use Basic Menu Basic Menu - The basic menu appears on the screen if you press the “MENU” button of the remote control. - There are 6 items Picture, Screen, Sound, Install, Function and DVB in the basic menu. - Each item has sub-items under it.
  • Page 23: To Watch Tv

    To Watch TV - If the AV1 terminal on the TV set is connected with an external device, which is switched on, the TV will come ON in AV1 mode. Otherwise, TV will come ON in the last mode used. 1.
  • Page 24 To Watch TV which also allows quick restart by remote control (see above: Turning on the TV). • Pressing the TV set local MAIN POWER button, you can PR 19 – – – – – Mono power off the TV set. In this case, you must use the same Full Screen local “POWER”...
  • Page 25: Setting Up Tv Analogue Stations

    Setting Up TV Analogue Stations Auto Tuning - All analogue stations that can be received are stored by this method. It is recommended that you use Auto tun- ing during installation of this set. NB: Ensure set is in Analogue TV mode. PR/PAGE 1.
  • Page 26: Manual Tuning

    Setting Up TV Analogue Stations Manual tuning NB: First ensure the TV is in analogue mode. 1. Press the Number buttons (0…9) or the “ PR ” but- ton to select a program number you want. PR/PAGE SELECT PR/PAGE 2. Locate the selection bar on the Manual tuning at the PR/PAGE Install menu.
  • Page 27 Setting Up TV Analogue Stations Setup The Setup menu shows you information as follows: - Channel, System, Frequency, Station name, Program number and Store to PR number. NB: First ensure the TV is in analogue mode. 1. Searching for channels in the Setup menu. •...
  • Page 28 Setting Up TV Analogue Stations Edit NB: First ensure the TV is set to analogue TV mode. The Edit menu shows you information as follows: - Program position assignment: Program number and Station name, Real channel number. - Skip information: Yes or No. 1.
  • Page 29: How To Install And Use Dvb (Digital Video Broadcasts)

    How To Install and Use DVB (Digital Video Broadcasts) The very first time that you switch to DVB mode, the Country UNITED KINGDOM will appear on the screen. Press the OK button to commence automatic scanning of the Digital TV Channels. After auto scanning has completed the TV and radio channels are separated.
  • Page 30: Favourite List

    How To Install and Use DVB (Digital Video Broadcasts) Favourite List You can select the desired item by using the “ / ” buttons and press the “OK” button to enter selected one. Favourite lists CREATE Create Access Modify Access Select Create item and press “OK”...
  • Page 31 How To Install and Use DVB (Digital Video Broadcasts) MODIFY Favourite lists You can modify the favourite list that you have created. The list named “TV” and “RADIO” are the default list and all the favour- Create Access Modify Access ite lists are made from those.
  • Page 32 How To Install and Use DVB (Digital Video Broadcasts) - New Channels shows the channels that you add in the channel list of new channels now being transmitted in your area. The type icon New Channels of the program is displayed against the channel name. ITV1 Note : ITV3...
  • Page 33 How To Install and Use DVB (Digital Video Broadcasts) SYSTEM PARAMETERS Using the “ / ” buttons to select the system parameters item and System Parameters press “OK” button to enter each item. System Information Access Factory Settings Access Software Upgrade Access Select Access...
  • Page 34: Parental Control

    How To Install and Use DVB (Digital Video Broadcasts) CONDITIONAL ACCESS Multi CI-CA List - This allows you to upgrade your TV set with additional features in- Top Up TV cluding access to extra channels (if available) using a conditional ac- cess module (eg.
  • Page 35 How To Install and Use DVB (Digital Video Broadcasts) EPG (Electronic Programme Guide) You can check program schedules by pressing the “GUIDE” button on TV Guide Five the remote control. Tuesday 09/10 06:00 Breakfast When you enter EPG the current program is highlighted and you can nav- 09:15 Real Rescues 10:00 Homes Live igate the channels by pressing the channel up/down “...
  • Page 36: Av Selection

    AV Selection Setting screen modes Adjustment of Screen Size in TV and AV mode - Pressing the “AV” button on the remote control the screen changes as follows: Component HDMI - When you select HDMI or PC mode, check the following. 1.
  • Page 37: Screen Adjustment

    Screen Adjustment When adjusting the screen to taste - You can enjoy various screens by adjusting Brightness, Contrast, Colour, Sharpness, etc. to the user’s taste. PR/PAGE 1. Select “Picture” by pressing the “MENU” button. Picture Picture Mode Dynamic • The menu screen appears as follows. SELECT Brightness Screen...
  • Page 38 Screen Adjustment Adjustment of Screen Size in TV and AV mode Default ZOOM format will be selected. Otherwise, the preferred mode of the user can be forced by repeatedly press- ing the remote control “ASPECT” button: The following picture formats are available: DLT-19W4/L1/L2 DLT-22W4/L1/L2 DLT-20J1,20J3,20J9...
  • Page 39 Screen Adjustment PR/PAGE 4. Adjustment of the Phase. Picture • Move to Phase in the Screen menu. SELECT Auto Adjustment Start Screen • Press the ” / ” buttons to adjust the phase to get a H Position PR/PAGE Sound V Position clear picture.
  • Page 40: Sound Adjustment

    Sound Adjustment When adjusting sound to taste - The user can enjoy various sounds by adjusting AVC, Effect, Balance and Equalizer. 1. Select AVC Mode. PR/PAGE • Select AVC (Auto Volume Correction) On/Off by press- Picture SELECT ing ” / ” button. Effect Screen Balance...
  • Page 41 Sound Adjustment Multi-Sound and Stereo 1. Mono Sound Selection. • During Stereo sound reception if the stereo is weak, you can switch to MONO by pressing the “ ” button. Then the colour of “MONO” character will change to Red. In Mono reception the depth of sound is improved.
  • Page 42: Analogue Menu Language Selection

    Analogue Menu Language Selection Analogue Menu Language Selection 1. Press the “MENU” button and select “Function” . PR/PAGE Picture Language English SELECT Child Lock Screen PR/PAGE Sound Install Function Select Change Exit 2. Select “Language” by pressing “ / ” button. PR/PAGE 3.
  • Page 43: Other Functions

    Other Functions Child Lock • Move to Child Lock in the Function menu. PR/PAGE • Select Child Lock to On using the “ ” button Picture Language English SELECT Child Lock Screen PR/PAGE Note : Sound • If the stand-by indicator is flashing red, and green then Install the TV set is in child lock mode.
  • Page 44: Sudoku Game (Option)

    Sudoku Game (option) Sudoku Game - This TV set allows you to enjoy playing the Sudoku game, it offers 3 levels of difficulties, enables you to save your grid and resume it later. ENTERING / EXITING GAME MODE Pressing the “GAME” key on your remote handset will switch the TV Set into game mode.
  • Page 45 Sudoku Game (option) PLAYING Use direction keys on the remote handset to move the cursor to desired position. Press digit keys to enter a number. It is always possible to overwrite a number previously entered. Trials and errors: - To erase a cell press “0” . - You might want to draw some numbers in a different colour (trial numbers) be- cause you need to fill up more cells to confirm that your option is valid.
  • Page 46: Teletext

    Teletext Teletext SWITCHING TELETEXT ON/OFF Press the “TEXT” button ( The index page or the page viewed last will appear. Press the “TEXT” button again to return to the TV mode. NOTE: Teletext works only in TV/AV mode. However digital broadcasts have digital text. To use digital text press the “TEXT”...
  • Page 47: Troubleshooting

    Troubleshooting Symptoms and Solutions Please check the following list prior to calling Daewoo Electronics Customer Service Centre for assistance. Symptom Check items Neither picture - Check the contact of sockets is OK. nor sound - Check the TV main power is on.
  • Page 48 Troubleshooting In PC mode Symptom Check items “NO SIGNAL” ap- - Ensure that the signal cable is firmly connected to PC and TV. pears on the - Check the resolution and frequency of your PC. Then, adjust them to screen. optimum condition for LCD TV.
  • Page 49: Specifications

    Specifications Model DLT-19W4T DLT-19L1T/L2T DLT-20J1T/J3T/J9T DLT-22W4T DLT-22L1T/L2T Screen Size 481.4mm (diagonal) 510.5mm (diagonal) 558.7mm (diagonal) Display Colour 16.7 M Aspect Ratio 16:10 16:10 Resolution 1440 x 900 (WXGA+) 640 x 480 (VGA) 1680 x 1050 (WSXGA+) Pixel Pitch 0.2835 x 0.2835 0.6375 x 0.6375...
  • Page 50 DMP39...

Table of Contents