Daewoo DLT-19W4T Instruction Manual

Daewoo DLT-19W4T Instruction Manual

Daewoo lcd television instruction manual
Hide thumbs Also See for DLT-19W4T:

Advertisement

Quick Links

LCD TELEVISION
INSTRUCTION MANUAL
DLT-19W4T
DLT-22W4T
DLT-20J1T
DLT-20J3T
DLT-20J9T
Helpline Number: 0870 100 2525
GB

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DLT-19W4T and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Daewoo DLT-19W4T

  • Page 1 LCD TELEVISION INSTRUCTION MANUAL DLT-19W4T DLT-22W4T DLT-20J1T DLT-20J3T DLT-20J9T Helpline Number: 0870 100 2525...
  • Page 2 Caution RISK OF ELECTRIC SHOCK CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage”...
  • Page 3 Please read the following safeguards for your TV and retain for future reference. Always follow all warnings and instructions marked on the television. 1. Read, Retain and Follow All Instructions Read all safety and operating instructions before operating the TV. Retain them safely for future reference. Follow all operations and instructions accordingly.
  • Page 4 Important Safeguards 12. Power Lines An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, ex- treme care should be taken from touching such power lines or circuits as contact with them might be fatal.
  • Page 5 This section must be read carefully and followed by the user prior to the operation of the product. The manual states important instructions for the user’s own safety, and the proper operation of the product. WARNING In case of an accident, please unplug the unit from the outlet immediately. To reduce the risk of electric shock, do not remove cover or back.
  • Page 6 Warning This section must be read carefully and followed by the user prior to the operation of the product. The manual states important instructions for the user’s own safety, and the proper operation of the product. CAUTION Please keep the user’s manual in a safe place for future reference. Do not view the TV too close- ly since it may cause damage to your eyes.
  • Page 7: Table Of Contents

    Installation and Maintenance Supplied Accessories ......8 Install Stand ........9 Parts of the Remote Control .
  • Page 8: Supplied Accessories

    Make sure that the following accessories are provided with the product. Remote control Instruction manual Batteries Cover Stand Base * 2 x 1,5V AAA Frame Stand * *) - Screws, Cover Stand Base and Frame Stand are only for DLT-19W4T and DLT-22W4T. For installing stand, see page 9.
  • Page 9: Install Stand

    ※ This page is only for DLT-19W4T and DLT-22W4T. 1. Insert Frame Stand into the Cover Stand Base and insert two screws (Ø3 x 12mm ) in the hole at the bottom of the stand and tighten. * Please insert two screws in the hole at the bottom of the stand.
  • Page 10: Parts Of The Remote Control

    Parts of the Remote Control MUTE : Press this button, and the sound goes off. Press again, and the sound returns. POWER : TV on/off button in STANDBY mode. 3. DVB/Analogue : Each time you press this button, the TV will toggle between DVB &...
  • Page 11 Parts of the Remote Control 16. LANGUAGE (digital mode only): Moves to multi audio language selection. See page 31. 17. FAVOURITE (digital mode only): Moves to Favourites channel. See page 29. 18. PREV PR : Previous PROGRAMME button in TV mode. 19.
  • Page 12: Name Of Each Part

    Name of Each Part Front LED Indicator DLT-19W4T; DLT-22W4T Remote Sensor PR Up/Down Volume Up/Down Menu Power On/Off DLT-20J3T LED Indicator DLT-20J1T; DLT-20J9T Remote Sensor Volume Up/Down PR Up/Down Power On/Off Remote Sensor LED Indicator...
  • Page 13 Name of Each Part Rear DLT-20J1T / DLT-20J3T / DLT-20J9T DLT-19W4T / DLT-22W4T (1) Component (2) SCART sockets (3) HDMI inputs (4) Headphone jack (5) Audio Input (L+R) Socket (6) Video Input Socket (7) Digital Audio out coaxial (8) PC Input...
  • Page 14: Preparation

    Preparation Inserting Batteries into the Remote Control Unit To load the batteries, turn the remote control handset over and open the battery compartment. Insert the batteries (Two 1.5V, type R03 or AAA). Make sure that the polarity matches with the (+) and (-) marks inside of the battery compartment.
  • Page 15: Antenna Connection

    Aerial Connection CONNECTING THE TV DIRECTLY TO AN AERIAL Connect an aerial cable (75 ohm coaxial cable) to the Aerial terminal on the back of the TV set. DLT-20J1T / DLT-20J3T / DLT-20J9T DLT-19W4T / DLT-22W4T Antenna Connection Aerial Aerial terminal...
  • Page 16 Now you can watch the VCR/DVD in TV mode by selecting the programme number “PR00” . Otherwise you will have to use a scart connection from your VCR/DVD to this TV into AV1 or AV2 and select the appropriate AV input on your TV to see VCR/DVD playback. DLT-19W4T / DLT-22W4T Aerial terminal...
  • Page 17: External Equipment Connection

    External Equipment Connection When you connect with a component video cable, please check the colour of the cable between the DVD and TV set. Note: 1. The meaning of the component marking. - ‘Y’ is a symbol for ‘Luminance’ - Pb is a symbol for ‘Picture Blue’ or B-Y - Pr is a symbol for ‘Picture Red’...
  • Page 18: Pc Connection

    PC Connection When connecting with PC(D-Sub) cable. 1. First adjust resolution of the PC (refer to table in page 19). Using the PC’s original monitor. 2. Then disconnect your monitor from your PC and connect between PC and TV set using the D-sub and Audio ca- ble as shown in the picture below.
  • Page 19: Multimedia Connection Notes

    - If possible please use the best resolution as show in the table below. * DLT-19W4T, 22W4T : 1440 x 900 at 60Hz * DLT-20J1T,20J3T,20J9T : 640 x 480 at 60Hz - If there is a “Vertical Frequency” setting menu in the [Dis- play] Menu of the PC, adjust the frequency to 60Hz.
  • Page 20: Digital Amp. Connection

    Digital Amp. Connection If you connect the coaxial output to a digital AMP, you can listen to surround sound, and output will be to the below table.
  • Page 21: Method To Use Basic Menu

    - The basic menu appears on the screen if you press the “MENU” button of the remote control. - There are 6 items Picture, Screen, Sound, Install, Function and DVB in the basic menu. - Each item has sub-items under it. If the desired item is selected, the relevant sub-items are displayed upward. 1.
  • Page 22: To Watch Tv

    To Watch TV - If the AV1 terminal on the TV set is connected with an external device, which is switched on, the TV will come ON in AV1 mode. Otherwise, TV will come ON in the last mode used. 1.
  • Page 23 must use the same local “POWER” button to switch on again (see above: Turning on the TV). 5. Checking TV operation status. • Pressing the “RECALL” ( ) button, the status of channel or broadcasting currently being watched or entry status of video component is displayed on the screen.
  • Page 24: Setting Up Tv Stations

    Setting Up TV Stations - All stations that can be received are stored by this method. It is recommended that you use Auto tuning during in- stallation of this set. 1. Press the “MENU” button to select the Install menu. •...
  • Page 25 1. Press the Number buttons (0…9) or the “ PR ” but- ton to select a program number you want. 2. Locate the selection bar on the Manual tuning at the Install menu. • Press the “MENU” button to select the Install menu. •...
  • Page 26 Setting Up TV Stations The Setup menu shows you information as follows: - Channel, System, Frequency, Station name, Program number and Store to PR number. 1. Searching for channels in the Setup menu. • Press the “ PR “ buttons to select a program number you want.
  • Page 27 The Edit menu shows you information as follows: - Program position assignment: Program number and Station name, Real channel number. - Skip information: Yes or No. 1. Deleting the program positions. • Move to Edit in the Install menu. • Move the selection bar to the program number to de- lete with the “...
  • Page 28: Dvb Menu

    DVB Menu The very first time that you switch to DVB mode, the Country selection menu will appear on the screen. Its purpose is to enable you to select the country that will be used for all the OSD (On Screen Display) menus. The user must enter a choice of country before proceeding further.
  • Page 29: Favourite List

    You can select the desired item by using the “ / ” buttons and press the “OK” button to enter selected one. CREATE Select Create item and press “OK” button to enter. The menu will be displayed on the screen. Once you enter the Create a Favourite list menu,a new channel list will be created, you can create a maximum of 4 favourites list.
  • Page 30 DVB Menu MODIFY You can modify the favourite list that you have created. The list named “TV” and “RADIO” are the default list and all the favour- ite lists are made from those. Select a favourite list and press the “OK” button to modify the list as you do in the create a favourite list menu.
  • Page 31 - New Channels shows the channels that you recently added in the channel list. The type icon of the program is displayed against the channel name. Note : • The DVB system requires a good signal to provide the best picture. For the DVB system, interference can disrupt the flow of data caus- ing the picture to appear to be made up of large blocks or to freeze intermittently.
  • Page 32 DVB Menu SYSTEM PARAMETERS Using the “ / ” buttons to select the system parameters item and press “OK” button to enter each item. - System Information You can see the system information but you cannot modify anything in this menu. Press the “OK” or “MENU” button to return to System Pa- rameters menu.
  • Page 33: Parental Control

    CONDITIONAL ACCESS - This allows you to upgrade your TV set with additional features in- cluding access to extra channels (if available) using a conditional ac- cess module (eg. TopUp TV). - If there is no CI Card in the slot, “No CI or CA device present” appears on the screen.
  • Page 34 DVB Menu EPG (Electronic Programme Guide) You can check program schedules by pressing the “GUIDE” button on the remote control. When you enter EPG the current program is highlighted and you can navigate channels by pressing the channel up/down “ / ” buttons to change channels and view the other programmes on the select- ed channel.
  • Page 35: Av Selection

    Adjustment of Screen Size in TV and AV mode - Pressing the “AV” button on the remote control the screen changes as follows: Component HDMI - When you select HDMI or PC mode, check the following. 1. For optimum picture quality, use to the computer or set top box outputs as shown below. Using other formats or refresh rates may result in reduced picture quality.
  • Page 36: Screen Adjustment

    Screen Adjustment When adjusting the screen to taste - You can enjoy various screens by adjusting Brightness, Contrast, Colour, Sharpness, etc. to the user’s taste. 1. Select “Picture” by pressing the “MENU” button. • The menu screen appears as follows. 2.
  • Page 37 Default ZOOM format will be selected. Otherwise, the preferred mode of the user can be forced by repeated press- ing of the remote control “ASPECT” button: The following picture formats is available: DLT-19W4T, 22W4T RF, AV1, AV2 MODE COMPONENT, HDMI, PC...
  • Page 38 Screen Adjustment 4. Adjustment of the Phase. • Move to Phase in the Screen menu. • Press the ” / ” buttons to adjust the phase to get a clear picture. 5. Adjustment of the Frequency. • Move to Frequency in the Screen menu. •...
  • Page 39: Sound Adjustment

    When adjusting sound to taste - The user can enjoy various sounds by adjusting AVC, Effect, Balance and Equalizer. 1. Select AVC Mode. • Select AVC (Auto Volume Correction) On/Off by press- ing ” / ” button. • Each sound source has its own signal conditions and it’s not so easy to adjust the volume level every time.
  • Page 40 Sound Adjustment Multi-Sound and Stereo 1. Mono Sound Selection. • During Stereo sound reception if the stereo is weak, you can switch to MONO by pressing the “ ” button. Then the colour of “MONO” character will change to Red. In Mono reception the depth of sound is improved.
  • Page 41: Analogue Menu Language Selection

    Analogue Menu Language Selection 1. Press the “MENU” button and select “Function” . 2. Select “Language” by pressing “ / ” button. 3. Select your desired language by pressing the “ / ” button. Then it will set automatically. The language changes as follows. English German French...
  • Page 42: Other Functions

    Other Functions • Move to Child Lock in the Function menu. • Select Child Lock to On using the “ ” button Note : • If stand-by indicator is flashing red, and green then the TV set is in child lock mode. It is necessary to use the re- mote control POWER button, NUMBER 0…9 buttons, or PR UP/DOWN buttons to bring the set out of stand- by mode.
  • Page 43: Sudoku Game (Option)

    - This TV set allows you to enjoy playing the Sudoku game, it offers 3 levels of difficulties, enables you to save your grid and resume it later. ENTERING / EXITING GAME MODE Pressing “GAME” key on your remote handset will switch the TV Set into game mode.
  • Page 44 Sudoku Game (option) PLAYING Use direction keys on the remote handset to move cursor to the desired position. Press digit keys to enter a number. It is always possible to overwrite a number previously entered. Trials and errors: - To erase a cell press “0” . - You might want to draw some numbers in a different colour (trial numbers) be- cause you need to fill up more cells to confirm that your option is valid.This can be done by typing twice the same digit.
  • Page 45: Teletext

    Teletext Teletext SWITCHING TELETEXT ON/OFF Press the “TEXT” button ( The index page or the page viewed last will appear. Press the “TEXT” button again to return to the TV mode. NOTE: Teletext works only in TV/AV mode. However digital broadcasts have digital text. To use digital text press the “TEXT”...
  • Page 46: Troubleshooting

    Troubleshooting Symptoms and Solutions Please check the following list prior to calling Daewoo Electronics Customer Service Centre for assistance. Symptom Neither picture - Check the contact of sockets is OK. nor sound - Check the TV main power is on.
  • Page 47 Symptom “NO SIGNAL” ap- pears on the screen. Image is not clear. Image is not cen- tred. • AFTER SALES SERVICE Do not hesitate to contact your retailer or service agent if a change in the performance of your product indicates that a faulty condition may be present.
  • Page 48: Specifications

    Specifications Model DLT-19W4T Screen Size 480mm (diagonal) Display Colour Aspect Ratio 16:10 Resolution 1440 x 900 (WXGA+) Pixel Pitch 0.2835 x 0.2835 Contrast Ratio 1000:1 w/o stand 476.3 x 346 x 80 Appearance (W x H x D) with stand 476.3 x 401.5 x 190...

This manual is also suitable for:

Dlt-20j3tDlt-20j9tDlt-20j1tDlt-22w4t

Table of Contents