Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Briteq BT-RETRO
Summary of Contents for Briteq BT-RETRO
-
Page 3: Before Use
• The integrated high power RGB-leds (48 x 3,5W RGB) can light up the reflector to produce amazing extra effects! • Several units can be fixed together by use of the optional BT-RETRO coupling adapter (order code 05519) • Integrated DMX-control for the halogen lamp dimmer & RGB-effects with different channel modes. -
Page 4: Safety Instructions
• Please use the original packing when the device is to be transported. • Due to safety reasons it is prohibited to make unauthorized modifications to the unit. Important: Never look directly into the light source! Don’t use the effect in the presence of persons suffering from epilepsy. BRITEQ 2/15 BT-RETRO ®... - Page 5 WTR-DMX DONGLE from BRITEQ ® . (available from WWW.BRITEQ-LIGHTING.COM - order code: 4645) 7. [MENU/ESC.]-button: used to enter and exit the setup menu or to jump to a higher level in the setup menu.
-
Page 6: Lamp Replacement
This secondary safety attachment should be installed in a way that no part of the installation can drop more than 20cm if the main attachment fails. • The device should be well fixed; a free-swinging mounting is dangerous and may not be considered! BRITEQ 4/15 BT-RETRO ®... - Page 7 • The operator has to make sure that the safety-relating and machine-technical installations are approved by an expert before using them for the first time. The installations should be inspected every year by a skilled person to be sure that safety is still optimal. FIXING SEVERAL PROJECTORS TOGETHER BRITEQ 5/15 BT-RETRO ®...
- Page 8 • Maximum 5 units may be mounted on top of each other. • Always use a scaffolding tube, clamps and omega brackets for maximum stability. • The optional BT-RETRO coupling adapter may only be used to keep the units tightly together.
-
Page 9: Setup Menu
TIMERS Last JOB xxxx Hrs INFORMATION LED Temp. xxx °C / °F Model Name BT-RETRO Firmware V. TEST AUTO TEST ON / OFF General instructions for setup. The SETUP-menu has three logically structured levels, refer to the menu structure. • Press the [MENU] button to enter the SETUP-menu. - Page 10 • Press the ▲/▼ buttons until the desired function is showing on the display. • Press the [ENTER] button: the values can be changed • Use ▲/▼ buttons to selected the desired curve: • Once you have the desired curve, press the [ENTER] button to save it. BRITEQ 8/15 BT-RETRO ®...
- Page 11 • Press the ▲/▼ buttons until the desired function is showing on the display. • Press the [ENTER] button: the values can be changed • Use ▲/▼ buttons to toggle between ON and OFF. • Press the [ENTER] button to confirm. BRITEQ 9/15 BT-RETRO ®...
- Page 12 [INFORMATION > LED Temp.] – Shows the actual temperature of the RGB LEDs. • Press the ▲/▼ buttons until the desired function is showing on the display. • Press the [ENTER] button: the LED temperature is shown. BRITEQ 10/15 BT-RETRO ®...
- Page 13 Note: The firmware of this unit can be upgraded using a special upgrade tool with Windows software. (separately available from Briteq). More information about this can be found in the user manual of the upgrade tool and / or our website: www.briteq-lighting.com [TEST >...
- Page 14 • Setup of the master: exactly the same procedure as the “STANDALONE” setup. • Setup of the slaves: all slaves should be set to [SLAVE MODE = ON], See the section “setup menu” for more information on the settings. BRITEQ 12/15 BT-RETRO ®...
-
Page 15: Dmx Charts
RED (0-100%) 000-255 GREEN (0-100%) 000-255 BLUE (0-100%) COLOR EFFECTS 000-007 No function (channels 4+5+6 are used) 008-027 028-047 Orange 048-067 Yellow 068-087 Green 088-097 Cyan 098-107 Blue 108-117 Purple COLORFADE (very slow → fast) 118-255 BRITEQ 13/15 BT-RETRO ®... -
Page 16: Maintenance
• The DMX-controller sends out a “discovery command”, all RDM devices respond and send their unique device ID. • The DMX-controller asks each RDM device for some basic data so it knows which devices are connected. The projector will respond: • Device name: BT-RETRO • Manufacturer: ® Briteq • Category: LED Dimmer •... -
Page 17: Specifications
48pcs RGB 3,5W LED Refresh rate: 1200 Hz Size: see drawings. Weight: 8,66 kg The information might be modified without prior notice You can download the latest version of this user manual on our website: www.briteq-lighting.com BRITEQ 15/15 BT-RETRO ®...
Need help?
Do you have a question about the BT-RETRO and is the answer not in the manual?
Questions and answers