Presetting Stations - Aiwa XR-DV3M Operating Instructions Manual

PRESETTING STATIONS

TUNER/
BAND
c
s
a
r,t
The unit can store up to a total of 32 preset stations. When a
station is stored, a preset number is assigned to the station. Use
the preset number to tune in to a preset station directly.
1 Press TUNER/BAND to select a band, and press
r or t to select a station.
2 Press a to store the station.
A preset number beginning from 1 in consecutive order for each
band is assigned to the station.
3 Repeat steps 1 and 2.
The next station will not be stored if a total of 32 preset stations
for all the bands have already been stored.
NOTE
"FULL" is displayed if you attempt to store more than 32 preset
stations.
0-9,+10
BAND
SHIFT
r,t
s
a
Preset number
PRESET NUMBER TUNING
Use the remote control to select the preset number directly.
1 Press BAND while pressing SHIFT to select a band.
2 Press numbered buttons 0-9 and +10 to select a
preset number.
Example:
To select preset number 20, press +10, +10 and 0.
To select preset number 15, press +10 and 5.
Selecting a preset number on the main unit
Press TUNER/BAND to select a band. Then, press c repeatedly.
Each time c is pressed, the next ascending number is selected.
To clear a preset station
Select the preset number of the station to be cleared. Then, press
s, and press a within 4 seconds.
The preset numbers of all other stations in the band with higher
numbers are also decreased by one.
En
33
ENGLISH