Aiwa XR-DV3M Operating Instructions Manual page 46

DTS OUTPUT
"dts Output" sets the dts output as to whether the connected
amplifier contains a DTS decoder or not.
The default setting is "dts OFF".
1 Select "Audio Output Setting" by using i/k in the setup
menu. Then press ENTER.
2 Use i/k to move the cursor to "dts Output".
Audio Output Setting
Choice The Item ik
1 Digital Stream
2 dts Output
3 Down Mix Type
ENTER : Choice item
SETUP : Completion
3 Press ENTER.
4 Use i/k to move the cursor to the setting suited to your
configuration.
dts Output
Choice The Item ik
1 dts
2 dts
ENTER : Choice item
SETUP : Completion
dts ON
Select this option if the unit is connected to an amplifier with a
DTS decoder.
dts OFF
Select this option if the unit is connected to an amplifier without
a DTS decoder.
5 Press ENTER.
Your entry is saved.
6 Press vRETURN to return to the previous screen, or press
SET UP to exit the setup menu.
CAUTION
If the AV amplifier is not equipped with a DTS decoder,
do not select "dts ON" in the "dts Output" when
connecting the AV amplifier with an optical connecting
cord.
Merely attempting to play a DVD may cause a high level of
noise which could be harmful to your ears and damage the
speakers. In such a case, be sure to select "dts OFF".
NOTE
When playing a disc that supports the DTS Digital Surround while
"dts Output" is set to "dts ON", no sound will be heard from the
unit's speakers and the headphones connected to the PHONES
jack.
44
ENGLISH
Down Mix PCM
OFF
Surround
RETURN : Previous menu
ON
OFF
RETURN : Previous menu
DOWN MIX TYPE
"Down Mix Type" selects the type of signal output from the LINE
OUT jacks.
This setting is effective only when a Dolby Digital decoder or an
amplifier with a built-in Dolby Digital decoder is connected to the
LINE OUT jacks.
The default setting is "Surround Mode".
1 Select "Audio Output Setting" by using i/k in the setup
menu. Then press ENTER.
2 Use i/k to move the cursor to "Down Mix Type".
Audio Output Setting
Choice The Item ik
1 Digital Stream
2 dts Output
3 Down Mix Type
ENTER : Choice item
SETUP : Completion
3 Press ENTER.
4 Use i/k to move the cursor to the setting suited to your
preference.
Down Mix Type
Choice The Item ik
1 Stereo Mode
2 Surround Mode
ENTER : Choice item
SETUP : Completion
Stereo Mode
Select this option to listen to the sound in normal stereo effect.
Surround Mode
Select this option to listen to the sound with surround effect.
5 Press ENTER.
Your entry is saved.
6 Press vRETURN to return to the previous screen, or press
SET UP to exit the setup menu.
Down Mix PCM
OFF
Surround
RETURN : Previous menu
RETURN : Previous menu